
VIHALS Sideboard, dark grey, 140x37x75 cm
+19.8 cm margin
Yes, it will fit!

Fit Details

IVAR Shelving unit, pine, 89x50x179 cm
Box: 179 × 9 × 5 cm · 2.85 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
179 × 9 × 5 cm
Status:+4.5 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Package #2
102 × 2 × 1 cm
Status:+65.4 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Package #3
83 × 50 × 2 cm
Status:+47 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Vehicle limits

Opening width / height
112 cm / 78 cm
Cargo width / height
100 cm / 87 cm
Cargo length seats up / down
90 cm / 166 cm
Loading sill height
75 cm
Audi Q3 2019
Measurements last checked and updated on Jul 31, 2026
Helpful tips
Use these loading tips to improve your chances of fitting IVAR Shelving unit, pine, 89x50x179 cm in Audi Q3 2019.
Use available cargo width
Center the package between the side walls before final rotation.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Other items to check in Audi Q3 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Audi Q3 2019 boot
The Audi Q3 gives you a wide, square boot mouth: 112 cm across and 78 cm tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 90 cm, and folding the rear bench stretches that to 166 cm, a gain of 76 cm that turns a school-run boot into a proper load bay. The floor stays 100 cm wide at its narrowest, so wide boxes sit flat. The catch is the lip: at 75 cm the sill is a high lift, with a 9 cm drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.
About the IVAR Shelving unit, pine, 89x50x179 cm package
The IVAR shelving unit ships in three slim cartons, the largest 179 cm long, 9 cm wide and only 5 cm thick. At 7.3 kg combined this is a light load, but the 1.79 m length is what dictates the car. A hatchback with the rear bench folded, an estate, or anything with a long load bay will take it. Even a small car can manage if you slide the front passenger seat forward and rest the bundle along the diagonal. Load the boxes flat together as one stack, and tape the bundle to stop them fanning out.
Frequently asked questions
Find quick answers about fit for IVAR Shelving unit, pine, 89x50x179 cm in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will IVAR Shelving unit, pine, 89x50x179 cm fit in Audi Q3 2019?
Yes. With seats down, it fits with +4.5 cm at Cargo width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo width, with +4.5 cm margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Do all packages fit?
Yes. All 3 packages fit individually in seats down. The tightest one is Package #1 (179 × 9 × 5 cm).
Does it fit with seats up or seats down?
Seats up: No (-26.4 cm). Seats down: Yes (+4.5 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (179 × 9 × 5 cm) is the tightest, with +4.5 cm at Cargo width.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +4.5 cm around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.