Will fit in a ?

No, it won't fit.

It will not fit in this setup: HOVET Mirror, aluminium, 78x196 cm is too large for a Cupra Formentor VZ 2023 with seats up.

Cupra Formentor VZ 2023

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening height, and you're short by 18 cm even with straight loading. We're about 95% confident in this estimate.

HOVET Mirror, aluminium, 78x196 cm

HOVET Mirror, aluminium, 78x196 cm

Box: 204 × 85 × 7 cm · 15.09 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

  • Package #1

    204 × 85 × 7 cm

    Status:18 cm short

    Limiting factor:Opening height

    Best orientation:Straight

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height

99 cm / 70 cm

Cargo width / height

100 cm / 81 cm

Cargo length seats up / down

81 cm / 159 cm

Sill to floor drop

11 cm

Cupra Formentor VZ 2023

Measurements last checked and updated on Jul 26, 2026

Helpful tips

Use these loading tips to improve your chances of fitting HOVET Mirror, aluminium, 78x196 cm in Cupra Formentor VZ 2023.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Keep a straight loading path

    Keep the package straight and level while loading.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Cupra Formentor VZ 2023 boot

The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 99 cm wide × 70 cm tall, a floor 81 cm long with the seats up, and 100 cm across at its narrow point. Fold the rear bench and the floor stretches to 159 cm, a gain of 78 cm, so it nearly doubles in length once the seats drop. The tight point is that 99 cm opening. Wide or long loads go in on a diagonal, and tall boxes are capped by the 70 cm height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 11 cm lip.

About the HOVET Mirror, aluminium, 78x196 cm package

The HOVET mirror ships in one flat-pack box, 204 cm long, 85 cm wide and 7 cm thick. Glass is the real concern here, the 15.1 kg weight is light but the panel is fragile and any flex during a turn can crack the surface. The 85 cm width is wider than most flat-pack panels, so even cars that fit the length can struggle on the diagonal. An estate or a tall hatch with seats folded fits it best. Lay it flat on a blanket, never on edge, and brace it against the back of the rear seats.

Frequently asked questions

Find quick answers about fit for HOVET Mirror, aluminium, 78x196 cm in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will HOVET Mirror, aluminium, 78x196 cm fit in Cupra Formentor VZ 2023?

No. With seats up, it is short by 18 cm at Opening height, even with straight loading.

What is the tightest part?

The limiting factor is Opening height, with -18 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Which loading orientation works best?

Straight is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-18 cm). Seats down: No (-18 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening height. The worst margin is -18 cm in seats up, so clearance is below the required buffer.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with -18 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-18 cm at Opening height).