HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+43 cm margin
All items that fit a Seat Leon 2019
Will fit in a ?
Yes, it will fit!
Good news: FJÄLLBO Shelving unit, black, 100x136 cm should fit diagonally in a Seat Leon 2019 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 18 cm to spare at opening height when loading diagonal. We're about 95% confident in this estimate.
FJÄLLBO Shelving unit, black, 100x136 cm
Box: 134 × 37 × 15 cm · 17.8 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
134 × 37 × 15 cm
Status:+18 cm to spare
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
109 cm / 55 cm
Cargo width / height
100 cm / 80 cm
Cargo length seats up / down
83 cm / 149 cm
Loading sill height
75 cm
Seat Leon 2019
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting FJÄLLBO Shelving unit, black, 100x136 cm in Seat Leon 2019.
Manage opening height
Keep the highest edge low at the trunk opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Seat Leon 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Seat Leon 2019 boot
The Leon's boot asks you to watch two figures: the height of the opening and the width of the floor. With the floor 25 cm below the loading sill, the boot is 80 cm tall measured from the floor, but only the 55 cm above the sill is open for a box to pass. Low, flat boxes suit it best. The opening is 109 cm wide while the floor is 100 cm at its narrowest. The floor is 83 cm long with the rear seats up, and 149 cm with them folded. A box as wide as the opening will not fit across the floor, so 100 cm is the width to check.
About the FJÄLLBO Shelving unit, black, 100x136 cm package
FJÄLLBO travels in one box, 134 cm long, 37 cm wide and 15 cm deep. At 17.8 kg one person can carry it, but the length makes it awkward: a box that long swings wide every time you turn. Lying straight, it needs 134 cm of clear boot floor, and going in end first, the opening has to clear its 37 cm by 15 cm end. Carry it near the middle, where it balances, and set one end down inside the boot first, then guide the rest in.
Frequently asked questions
Find quick answers about fit for FJÄLLBO Shelving unit, black, 100x136 cm in Seat Leon 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will FJÄLLBO Shelving unit, black, 100x136 cm fit in Seat Leon 2019?
Yes. With seats down, it fits with 18 cm to spare at Opening height. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening height, with +18 cm margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +18 cm margin.
How tight is this fit?
This result is in the comfortable clearance band (+18 cm at Opening height).
Does it fit with seats up or seats down?
Seats up: No (-13.3 cm). Seats down: Yes (+18 cm). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 6 cm to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 6 cm to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +18 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.