HAUGA Chest of 6 drawers, white, 138x46x84 cm
+26 cm margin
All items that fit a Dacia Duster 2023
Will fit in a ?
Yes, it will fit!
Good news: FJÄLLBO Shelving unit, black, 100x136 cm should fit diagonally in a Dacia Duster 2023 with seats down.
Fit Details
With seats down, Good news - this package should fit, with 34.1 cm to spare at opening width when loading diagonal. We're about 95% confident in this estimate.
FJÄLLBO Shelving unit, black, 100x136 cm
Box: 134 × 37 × 15 cm · 17.8 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
134 × 37 × 15 cm
Status:+34.1 cm to spare
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height above sill
98 cm / 73 cm
Cargo width / height
100 cm / 81 cm
Cargo length seats up / down
97 cm / 164 cm
Loading sill height
76 cm
Dacia Duster 2023
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting FJÄLLBO Shelving unit, black, 100x136 cm in Dacia Duster 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Dacia Duster 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Dacia Duster 2023 boot
Most of the work in the Duster's boot is the lift: the loading sill sits 76 cm off the ground. Past the sill the floor drops 8 cm, and measured from that floor the boot is 81 cm tall. The opening is 98 cm across and leaves 73 cm of clear height above the sill. Seats up, the floor measures 97 cm long by 100 cm wide at its tightest, close to square, which suits several boxes. Seats down, it grows by 67 cm to 164 cm for long flat packs. Rest the front edge of each box on the sill, then slide it in.
About the FJÄLLBO Shelving unit, black, 100x136 cm package
FJÄLLBO travels in one box, 134 cm long, 37 cm wide and 15 cm deep. At 17.8 kg one person can carry it, but the length makes it awkward: a box that long swings wide every time you turn. Lying straight, it needs 134 cm of clear boot floor, and going in end first, the opening has to clear its 37 cm by 15 cm end. Carry it near the middle, where it balances, and set one end down inside the boot first, then guide the rest in.
Frequently asked questions
Find quick answers about fit for FJÄLLBO Shelving unit, black, 100x136 cm in Dacia Duster 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will FJÄLLBO Shelving unit, black, 100x136 cm fit in Dacia Duster 2023?
Yes. With seats down, it fits with 34.1 cm to spare at Opening width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with +34.1 cm margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +34.1 cm margin.
How tight is this fit?
This result is in the comfortable clearance band (+34.1 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-7.9 cm). Seats down: Yes (+34.1 cm). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 6 cm to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 6 cm to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +34.1 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.