All items that fit a Peugeot 208 2020

Will fit in a ?

No, it won't fit.

For BROR Shelving unit, black, 85x55x190 cm in a Peugeot 208 2020 with seats up: no package is a clear yes; 4 packages are borderline, and 1 package does not fit.

Peugeot 208 2020

Fit Details

With seats up, Not a fit in this setup. 4 packages are borderline, and 1 does not fit. Worst case is Package #1 (206 × 6 × 6 cm), short by 73.1 cm at cargo length. We're about 95% confident in this estimate.

BROR Shelving unit, black, 85x55x190 cm

BROR Shelving unit, black, 85x55x190 cm

Box: 206 × 6 × 6 cm · 5.43 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    206 × 6 × 6 cm

    Status:73.1 cm short

    Limiting factor:Cargo length

    Best orientation:Diagonal

  • Package #2

    85 × 54 × 2 cm · 4 boxes

    Status:+3 cm, tight

    Limiting factor:Opening height

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 208 2020

Opening width / height above sill

86 cm / 57 cm

Cargo width / height

96 cm / 75 cm

Cargo length seats up / down

67 cm / 131 cm

Loading sill height

71 cm

Peugeot 208 2020

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BROR Shelving unit, black, 85x55x190 cm in Peugeot 208 2020.

  • Use available cargo length

    Use seats down if available to gain cargo length.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 208 2020 boot

In the 208's boot, the floor sits 18 cm below the loading sill, and the sill itself is 71 cm high. So every box goes up to the sill, then down to the floor. The opening is 86 cm wide with 57 cm of clear height above the sill, while the boot is 75 cm tall from its floor and the floor is 96 cm wide at its narrowest. With the rear seats up, the 67 cm floor takes small boxes. Some flat packs longer than 67 cm fit too, on their side at an angle. Folding the seats adds 64 cm, for 131 cm. A tall box only gets in on its side. Rest each box on the sill, then ease it down the 18 cm to the floor.

About the BROR Shelving unit, black, 85x55x190 cm package

The BROR shelving unit comes as five boxes, 19.67 kg in total. The longest is a slim pole of a box: 206 cm × 6 cm × 6 cm, at 5.43 kg. The other four are flat, each 85 cm × 54 cm × 2 cm and 3.56 kg. Weight is no issue here. Length is. That long box needs a 206 cm run of boot floor to lie straight. Lying straight, it only asks the opening to clear its 6 cm by 6 cm end. At an angle across the floor, it needs a shorter run, and the verdict on this page shows whether your car takes it. Lay the flat boxes down first, then feed the long one in last, end first.

Frequently asked questions

Find quick answers about fit for BROR Shelving unit, black, 85x55x190 cm in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BROR Shelving unit, black, 85x55x190 cm fit in Peugeot 208 2020?

No. With seats up, it is short by 73.1 cm at Cargo length, even with diagonal loading.

What is the tightest part?

The limiting factor is Cargo length, with -73.1 cm margin in seats up.

Which package is the hardest to load?

Package #1 (206 × 6 × 6 cm) is the tightest, with -73.1 cm at Cargo length.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-73.1 cm). Seats down: No (-39.5 cm). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 6 cm to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 6 cm to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Why does it not fit?

The blocker is Cargo length: with seats up, the box is 73.1 cm bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -73.1 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.