IVAR Shelving unit, pine, 89x50x179 cm
+15.8 cm margin
Will fit in a ?
Maybe, it's a tight fit.
All 2 packages of BROR Shelving unit, black, 85x55x190 cm look possible diagonally in a BMW X3 2022 with seats down, but clearances are tight.
Fit Details
With seats down, This looks possible, but tight. All 2 packages are borderline or better; the tightest is Package #1 (206 × 6 × 6 cm) at opening width with -2.2 cm (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
BROR Shelving unit, black, 85x55x190 cm
Box: 206 × 6 × 6 cm · 5.43 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 × 6 × 6 cm
Status:-2.2 cm tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
85 × 54 × 2 cm
Status:+53 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Straight
Vehicle limits
Opening width / height
112 cm / 79 cm
Cargo width / height
110 cm / 79 cm
Cargo length seats up / down
95 cm / 178 cm
Loading sill height
70 cm
BMW X3 2022
Measurements last checked and updated on Aug 30, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BROR Shelving unit, black, 85x55x190 cm in BMW X3 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in BMW X3 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the BMW X3 2022 boot
The X3's boot is a wide, flat loading bay. The opening measures 112 cm across by 79 cm tall, and the floor keeps 110 cm at its narrowest, so wide cartons that snag in smaller SUVs pass through here. Depth is the trade-off: 95 cm of floor with the seats up, 178 cm folded, a gain of +83 cm. The sill sits at 70 cm with no drop to the floor behind it, so a heavy box slides in level instead of being lowered over a lip. Long flat-packs need the bench down; seats up, this is a squarish bay for shorter boxes. Push heavy loads across the sill rather than lifting them over it.
About the BROR Shelving unit, black, 85x55x190 cm package
The largest BROR box is 206 by 6 by 6 cm, basically a long thin pole. The dimension that hurts is the length, so any car with a 200 plus cm load floor with seats folded will take it. A hatchback with the rear bench dropped or an estate works fine, an SUV is overkill on volume. Slide the box in through the boot opening at a slight diagonal so the corner clears the rear pillar. Two packages, both light at 9 kg total, so loading order matters less than length.
Frequently asked questions
Find quick answers about fit for BROR Shelving unit, black, 85x55x190 cm in BMW X3 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BROR Shelving unit, black, 85x55x190 cm fit in BMW X3 2022?
Maybe. With seats down, this is a borderline fit at Opening width (-2.2 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -2.2 cm margin in seats down.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -2.2 cm around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-48.1 cm). Seats down: Maybe (-2.2 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206 × 6 × 6 cm) is the tightest, with -2.2 cm at Opening width.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -2.2 cm margin.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.