HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+14.1 cm margin
WillBRIMNES Day-bed frame with 2 drawers, white, 80x200 cmfit in aPeugeot 2008 2020?
No, it won't fit.
For BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in a Peugeot 2008 2020 with seats up: 2 of 3 packages fit, and 1 package does not fit.
Fit Details
With seats up, Not a full fit. 2 of 3 packages fit, and 1 does not fit. Worst case is Package #1 (206 × 59 × 7 cm), short by 59.9 cm at opening width. Packages that do not fit will need a larger vehicle or delivery. We're about 95% confident in this estimate.
BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm
Box: 206 × 59 × 7 cm · 39.7 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 × 59 × 7 cm
Status:59.9 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
96 × 58 × 9 cm
Status:+10.5 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Package #3
93 × 56 × 9 cm
Status:+12.5 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Vehicle limits
Opening width / height
102 cm / 78 cm
Cargo width / height
96 cm / 88 cm
Cargo length seats up / down
78 cm / 155 cm
Loading sill height
71 cm
Peugeot 2008 2020
Measurements last checked and updated on Jul 16, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Peugeot 2008 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 2008 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 2008 2020 boot
The Peugeot 2008 boot is a compact space that changes character the moment you fold the rear seats. Upright, the floor runs 78 cm, which handles a weekly shop and a couple of cases but little that is long. Fold the bench and it stretches to 155 cm, a gain of 77 cm, so long flat boxes become possible. The opening is 102 cm wide by 78 cm tall, wider than the 96 cm floor, so boxes clear the mouth but rely on that folded length. The load lip sits 71 cm off the ground with only a 10 cm drop to the floor, so lift to the sill, then slide straight in.
About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package
The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.
On pickup day
This one is a no in the Peugeot 2008, and not a close one. The BRIMNES day-bed ships as a 206 cm by 59 cm by 7 cm board, and even turned diagonally it sits 59.9 cm outside the 102 cm wide by 78 cm tall opening with the seats up. Fold the rear bench and you claw back 40.8 cm, but you are still 19.1 cm short, so it will not lie flat inside. For a box this long you want a roof rack or a van. Slide the parcel shelf out and measure the longest package against the opening before pickup day.
Frequently asked questions
Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Peugeot 2008 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Peugeot 2008 2020?
No. With seats up, it is short by 59.9 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -59.9 cm margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -59.9 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -59.9 cm around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-59.9 cm). Seats down: No (-19.1 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206 × 59 × 7 cm) is the tightest, with -59.9 cm at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -59.9 cm margin.
How many packages fit and how many do not?
Fit packages: 2. Borderline packages: 0. Not fitting packages: 1.