KALLAX Shelving unit, white, 147x147 cm
+32 cm margin
Will fit in a ?
Maybe, it's a tight fit.
All 3 packages of BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm look possible diagonally in a Citroen Berlingo 2018 with seats down, but clearances are tight.
Fit Details
With seats down, This looks possible, but tight. All 3 packages are borderline or better; the tightest is Package #1 (206 × 59 × 7 cm) at opening width with -2.5 cm (best loaded diagonal). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm
Box: 206 × 59 × 7 cm · 39.7 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 × 59 × 7 cm
Status:-2.5 cm tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
96 × 58 × 9 cm
Status:+59 cm margin
Limited by
Limiting factor:Opening width
Best orientation:Straight
Package #3
93 × 56 × 9 cm
Status:+61 cm margin
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits
Opening width / height
120 cm / 100 cm
Cargo width / height
120 cm / 100 cm
Cargo length seats up / down
99 cm / 176 cm
Loading sill height
57 cm
Citroen Berlingo 2018
Measurements last checked and updated on Jul 23, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Citroen Berlingo 2018.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Citroen Berlingo 2018
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Citroen Berlingo 2018 boot
The Citroen Berlingo gives you a proper van-style boot: a wide, square opening at 120 cm wide × 100 cm tall and a flat floor that stays 120 cm across at its narrowest. Seats up the floor runs 99 cm, which is short for long boxes, but fold the bench and it stretches to 176 cm, a gain of 77 cm. The load sill sits 57 cm up with no drop to the floor, so you slide boxes straight in rather than lifting them down. It takes wide, bulky and multi-box loads happily. For anything past a metre, fold first and load flat.
About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package
The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.
On pickup day
With the rear seats up, the BRIMNES day-bed box does not fit the Berlingo: at 206 cm × 59 cm × 7 cm it lands 44.2 cm short of the 120 cm wide × 100 cm tall opening. Fold the back bench and you gain 41.7 cm, which pulls the gap to 2.5 cm. That is a maybe, not a clear yes, so load it diagonal and flat and expect it to be tight. Measure the box and the boot lip with a tape before pickup, and mind the parcel shelf on the way in.
Frequently asked questions
Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Citroen Berlingo 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Citroen Berlingo 2018?
Maybe. With seats down, this is a borderline fit at Opening width (-2.5 cm). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -2.5 cm margin in seats down.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -2.5 cm around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-44.2 cm). Seats down: Maybe (-2.5 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206 × 59 × 7 cm) is the tightest, with -2.5 cm at Opening width.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -2.5 cm margin.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.