HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+21.5 cm margin
Will fit in an ?
No, it won't fit.
For BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in an Audi Q3 2019 with seats up: 2 of 3 packages fit, and 1 package does not fit.
Fit Details
With seats up, Not a full fit. 2 of 3 packages fit, and 1 does not fit. Worst case is Package #1 (206 × 59 × 7 cm), short by 46.4 cm at opening width. Packages that do not fit will need a larger vehicle or delivery. We're about 95% confident in this estimate.
BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm
Box: 206 × 59 × 7 cm · 39.7 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 × 59 × 7 cm
Status:46.4 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
96 × 58 × 9 cm
Status:+17 cm margin
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Package #3
93 × 56 × 9 cm
Status:+19 cm margin
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits
Opening width / height
112 cm / 78 cm
Cargo width / height
100 cm / 87 cm
Cargo length seats up / down
90 cm / 166 cm
Loading sill height
75 cm
Audi Q3 2019
Measurements last checked and updated on Jul 31, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Audi Q3 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Audi Q3 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Audi Q3 2019 boot
The Audi Q3 gives you a wide, square boot mouth: 112 cm across and 78 cm tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 90 cm, and folding the rear bench stretches that to 166 cm, a gain of 76 cm that turns a school-run boot into a proper load bay. The floor stays 100 cm wide at its narrowest, so wide boxes sit flat. The catch is the lip: at 75 cm the sill is a high lift, with a 9 cm drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.
About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package
The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.
On pickup day
This one stays on the shop floor. The BRIMNES day-bed frame ships as a 206 cm × 59 cm × 7 cm board, and the Q3 boot opening is 112 cm wide by 78 cm tall, so even turned diagonally the long edge sits 46.4 cm past what the mouth allows. Fold the rear bench and you win back 41.8 cm of that gap, but the box is still 4.6 cm too long, a near miss rather than a maybe. Measure your own opening at the widest point first, because trim and badge details shift it a little.
Frequently asked questions
Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Audi Q3 2019?
No. With seats up, it is short by 46.4 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -46.4 cm margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -46.4 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -46.4 cm around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-46.4 cm). Seats down: No (-4.6 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206 × 59 × 7 cm) is the tightest, with -46.4 cm at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -46.4 cm margin.
How many packages fit and how many do not?
Fit packages: 2. Borderline packages: 0. Not fitting packages: 1.