Willfit in a?

No, it won't fit.

For BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in an Audi A3 Sportback 2024 with seats up: 2 of 3 packages fit, and 1 package does not fit.

Audi A3 Sportback 2024

Fit Details

With seats up, Not a full fit. 2 of 3 packages fit, and 1 does not fit. Worst case is Package #1 (206 × 59 × 7 cm), short by 67.2 cm at opening width. Packages that do not fit will need a larger vehicle or delivery. We're about 95% confident in this estimate.

BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm

BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm

Box: 206 × 59 × 7 cm · 39.7 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Mar 25, 2026

  • Package #1

    206 × 59 × 7 cm

    Status:67.2 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    96 × 58 × 9 cm

    Status:+9.8 cm margin

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #3

    93 × 56 × 9 cm

    Status:+12.3 cm margin

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi A3 Sportback 2024

Opening width / height

97 cm / 77 cm

Cargo width / height

99 cm / 93 cm

Cargo length seats up / down

77 cm / 149 cm

Loading sill height

67 cm

Audi A3 Sportback 2024

Measurements last checked and updated on Jul 01, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Audi A3 Sportback 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Audi A3 Sportback 2024 boot

The Audi A3 Sportback boot is wide and square, better for bulk than for length. The opening is 97 cm wide by 77 cm tall, and the narrow part of the floor still holds 99 cm across, generous for this class. Seats up you get 77 cm of floor length, folding the rear bench takes that to 149 cm, a gain of 72 cm. The load lip is a low 67 cm with only a 16 cm drop to the floor, so lifting boxes in is easy on your back. It swallows wide boxes, crates and a couple of cases side by side, but long flat-packs still need the seats folded. Load your widest item flat first, then build up.

About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package

The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.

On pickup day

The BRIMNES day-bed will not go in the Audi A3 Sportback, seats up or down. The longest package is 206 cm, and the A3 opening is 97 cm wide, so the best diagonal still leaves you 67.2 cm short with the seats up. Folding the rear bench adds 38.8 cm of floor, but you are still 28.4 cm short after that, so the answer does not change. It ships in three boxes, so weight is not the problem, the long side panel is. If you are set on this frame, an estate or a van is the realistic option. Check your own opening first, trims differ.

Frequently asked questions

Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Audi A3 Sportback 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Audi A3 Sportback 2024?

No. With seats up, it is short by 67.2 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -67.2 cm margin in seats up.

Why does it not fit?

The blocker is Opening width. The worst margin is -67.2 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -67.2 cm around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-67.2 cm). Seats down: No (-28.4 cm). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (206 × 59 × 7 cm) is the tightest, with -67.2 cm at Opening width.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -67.2 cm margin.

How many packages fit and how many do not?

Fit packages: 2. Borderline packages: 0. Not fitting packages: 1.