Will fit in an ?

No, it won't fit.

For BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in an Alfa Romeo Giulietta 2017 with seats up: 1 of 3 packages fit, 1 package is a borderline fit, and 1 package does not fit.

Alfa Romeo Giulietta 2017

Fit Details

With seats up, Not a full fit. 1 of 3 packages fit, 1 is borderline, and 1 does not fit. Worst case is Package #1 (206 × 59 × 7 cm), short by 76.4 cm at opening width. Packages that do not fit will need a larger vehicle or delivery. We're about 95% confident in this estimate.

BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm

BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm

Box: 206 × 59 × 7 cm · 39.7 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

  • Package #1

    206 × 59 × 7 cm

    Status:76.4 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #2

    96 × 58 × 9 cm

    Status:+1.2 cm tight

    Limiting factor:Opening width

    Best orientation:Diagonal

  • Package #3

    93 × 56 × 9 cm

    Status:+3.7 cm margin

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Alfa Romeo Giulietta 2017

Opening width / height

90 cm / 76 cm

Cargo width / height

102 cm / 97 cm

Cargo length seats up / down

76 cm / 147 cm

Loading sill height

77 cm

Alfa Romeo Giulietta 2017

Measurements last checked and updated on Sep 01, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Alfa Romeo Giulietta 2017.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Plan package order

    Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Alfa Romeo Giulietta 2017 boot

The Giulietta gives you a short, wide hatch boot. The opening is 90 cm wide by 76 cm tall and the floor runs only 76 cm with the rear seats up, reaching 147 cm once you fold the bench, a gain of 71 cm. Between the wheel arches you get 102 cm, wider than the opening itself. That is the shape to plan for: plenty of width, not much length. Cases and stacked boxes suit it, long flat-packs do not. The sill sits 77 cm up with a 21 cm drop, so lower heavy boxes in rather than sliding them.

About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package

The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.

On pickup day

The BRIMNES day-bed does not go in the Giulietta. The longest of its three packages runs 206 cm, and even turned diagonally it comes up 76.4 cm short against the 90 cm wide opening. Folding the rear bench recovers 36.7 cm and still leaves you 39.7 cm short, so the seats are not the problem here. The boot mouth is. Order delivery on the bed frame, or borrow a van for an hour. If you want to check it yourself, run a tape across the opening at its narrowest point before you drive to the store.

Frequently asked questions

Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Alfa Romeo Giulietta 2017, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Alfa Romeo Giulietta 2017?

No. With seats up, it is short by 76.4 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -76.4 cm margin in seats up.

Why does it not fit?

The blocker is Opening width. The worst margin is -76.4 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -76.4 cm around the limiting point.

Do all packages fit in the car at the same time?

We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.

Does it fit with seats up or seats down?

Seats up: No (-76.4 cm). Seats down: No (-39.7 cm). Default selection follows YES > MAYBE > NO.

Which package is the hardest to load?

Package #1 (206 × 59 × 7 cm) is the tightest, with -76.4 cm at Opening width.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -76.4 cm margin.

How many packages fit and how many do not?

Fit packages: 1. Borderline packages: 1. Not fitting packages: 1.