NORDEN Gateleg table, birch, 26/89/152x80 cm
+8 cm margin
Will fit in an ?
Maybe, it's a tight fit.
All 3 packages of BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm look possible in a straight orientation in an Alfa Romeo Brera 2008 with seats up, but clearances are tight.
Fit Details
With seats up, This looks possible, but tight. All 3 packages are borderline or better; the tightest is Package #1 (206 × 59 × 7 cm) at opening height with -1 cm (best loaded straight). See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm
Box: 206 × 59 × 7 cm · 39.7 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 × 59 × 7 cm
Status:-1 cm tight
Limited by
Limiting factor:Opening height
Best orientation:Straight
Package #2
96 × 58 × 9 cm
Status:0 cm tight
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Package #3
93 × 56 × 9 cm
Status:+2 cm tight
Limited by
Limiting factor:Opening height
Best orientation:Diagonal
Vehicle limits
Opening width / height
99 cm / 61 cm
Cargo width / height
84 cm / 89 cm
Cargo length seats up / down
95 cm / 152 cm
Loading sill height
90 cm
Alfa Romeo Brera 2008
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Alfa Romeo Brera 2008.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Alfa Romeo Brera 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Brera 2008 boot
The Brera gives you a letterbox: the opening is 99 cm wide but only 61 cm tall. Behind the seats you get 95 cm of floor, and folding the rear seats takes that to 152 cm, a gain of 57 cm. The floor narrows to 84 cm at its tightest, so a wide flat box has to go in at an angle. This boot handles long low loads better than tall ones. Plan for the sill: it sits 90 cm off the ground with a 28 cm drop to the floor, so lift high, rest the box on the sill, then let it down.
About the BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm package
The BRIMNES day-bed ships in three flat packs, and the long one is the problem: 206 cm long, 59 cm wide, only 7 cm thick. Stacked weight comes in at 83.8 kg, so two pairs of hands beat one. The 2 m length rules out small hatchbacks even with the bench folded. Estates, large SUVs, and vans take it without drama. For anything in between, plan the diagonal route through the cabin and check the path past the parcel shelf clips. Load the long pack first, then the two shorter boxes on top.
On pickup day
One centimetre decides this one, which is why it reads as a maybe and not a no. The longest BRIMNES package is 206 cm by 59 cm by 7 cm, and the Brera boot opening is 99 cm wide by 61 cm tall. Loaded straight, that 59 cm face leaves so little around the seals and trim that the sum lands 1 cm short. Folding the rear seats changes nothing, because the limit is the opening itself. At this margin, measure your own car and take a blanket for the lip.
Frequently asked questions
Find quick answers about fit for BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Day-bed frame with 2 drawers, white, 80x200 cm fit in Alfa Romeo Brera 2008?
Maybe. With seats up, this is a borderline fit at Opening height (-1 cm). Best orientation: straight.
What is the tightest part?
The limiting factor is Opening height, with -1 cm margin in seats up.
What can I try to make it work?
Use straight loading and focus on opening height. Keep the highest edge low at the trunk opening. Keep the package straight and level while loading.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
Does it fit with seats up or seats down?
Seats up: Maybe (-1 cm). Seats down: Maybe (-1 cm). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (206 × 59 × 7 cm) is the tightest, with -1 cm at Opening height.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -1 cm margin.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the very tight borderline band (-1 cm at Opening height).