
MALM Bed frame, high, white/Luröy, Standard Double
+42.2 cm margin
Yes, it will fit!

Fit Details

BRIMNES Bed frame with storage, white/Luröy, Standard Double
Box: 68 × 22 × 10 cm · 8.51 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Jun 17, 2026
Package
Status
Limiting factor
Best orientation
Package #1
68 × 22 × 10 cm
Status:+42.2 cm margin
Limited by
Limiting factor:Cargo width
Best orientation:Diagonal
Vehicle limits

Opening width / height
104 cm / 87 cm
Cargo width / height
100 cm / 92 cm
Cargo length seats up / down
101 cm / 181 cm
Loading sill height
69 cm
Toyota RAV4 2024
Measurements last checked and updated on Mar 10, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BRIMNES Bed frame with storage, white/Luröy, Standard Double in Toyota RAV4 2024.
Use available cargo width
Center the package between the side walls before final rotation.
Load diagonally first
Load diagonally first, then straighten once inside.
Other items to check in Toyota RAV4 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota RAV4 2024 boot
The RAV4 2024 is the easy case in this catalogue. The opening runs 104 cm wide by 87 cm tall, the boot floor measures 101 cm long with the seats up and 181 cm folded, and the cargo width stays a consistent 100 cm right back to the rear seats. The sill is a low 69 cm with a 5 cm drop, so you load close to the ground. This boot swallows mid-size flat packs upright, multi-pack loads side by side, and most coffee tables seats up. Anything past 1.8 m still needs the bench folded.
About the BRIMNES Bed frame with storage, white/Luröy, Standard Double package
The BRIMNES bed with storage ships in five flat cartons, the largest 197 cm long, 56 cm wide and only 6 cm thick. Five boxes is the awkward part: combined weight is 93 kg and you are stacking long, slim, rigid cardboard. The 1.97 m length needs the rear bench folded on most cars, or an estate. Load the longest box first, flat along the centre of the floor, then layer the rest on top with the heaviest underneath and the side rails on top. Plan two people for this one.
On pickup day
The BRIMNES bed frame just fits the RAV4 with the rear seats folded, leaving 0.5 cm of margin once you angle the 197 cm package diagonally across the 181 cm folded floor. Seats up is out: the 104 cm boot opening is 42.5 cm short of the longest plank and you would block the rear bench. Fold the bench flat, slide the longest piece in first on a diagonal, then layer the smaller packages on top. Measure your own car at the kerb before committing, since boot liners eat into the working length.
Frequently asked questions
Find quick answers about fit for BRIMNES Bed frame with storage, white/Luröy, Standard Double in Toyota RAV4 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BRIMNES Bed frame with storage, white/Luröy, Standard Double fit in Toyota RAV4 2024?
Yes. With seats up, it fits with +42.2 cm at Cargo width. Best orientation: diagonal.
What is the tightest part?
The limiting factor is Cargo width, with +42.2 cm margin in seats up.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: Yes (+42.2 cm). Seats down: Yes (+74 cm). Default selection follows YES > MAYBE > NO.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with +42.2 cm around the limiting point.
How tight is this fit?
This result is in the comfortable clearance band (+42.2 cm at Cargo width).