
NORDEN Gateleg table, birch, 26/89/152x80 cm
+7.2 cm margin
No, it won't fit.

Fit Details

BILLY Bookcase, white, 80x28x202 cm
Box: 206 × 30 × 13 cm · 36.85 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 01, 2026
Package
Status
Limiting factor
Best orientation
Package #1
206 × 30 × 13 cm
Status:85.3 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
88 cm / 87 cm
Cargo width / height
101 cm / 104 cm
Cargo length seats up / down
68 cm / 133 cm
Loading sill height
68 cm
Toyota Yaris 2018
Measurements last checked and updated on Jul 15, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Toyota Yaris 2018.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Toyota Yaris 2018
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota Yaris 2018 boot
The Toyota Yaris gives you a compact hatchback boot. The opening is 88 cm wide and 87 cm tall, and the floor runs 68 cm deep with the seats up, enough for a weekly shop, a pushchair, or a few small boxes. Fold the rear bench and the floor extends to 133 cm, a gain of 65 cm, which nearly doubles what you can carry. Long loads like bed frames or wardrobe panels still overhang and will not go. You lift over a 68 cm sill then drop 17 cm into the well, so slide heavy boxes in rather than lower them by hand.
About the BILLY Bookcase, white, 80x28x202 cm package
The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.
On pickup day
The BILLY bookcase does not fit the Toyota Yaris. Its single box is 206 cm long, and with the seats up you are 85.3 cm short against an 88 cm opening. Folding the rear bench adds 33.2 cm of room, yet you still land 52.1 cm short, since the folded floor stops at 133 cm. A 206 cm box simply outruns this boot in every orientation. If you want it home in one trip, you need an estate or a van, not the Yaris. Worth a tape measure check first, as boots vary by trim.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Toyota Yaris 2018, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, white, 80x28x202 cm fit in Toyota Yaris 2018?
No. With seats up, it is short by 85.3 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -85.3 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -85.3 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-85.3 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-85.3 cm). Seats down: No (-52.1 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -85.3 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -85.3 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.