Will fit in a ?

No, it won't fit.

It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a Mercedes Benz A-Class 2019 with seats up.

Mercedes Benz A-Class 2019

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 71.9 cm even with diagonal loading. We're about 95% confident in this estimate.

BILLY Bookcase, white, 80x28x202 cm

BILLY Bookcase, white, 80x28x202 cm

Box: 206 × 30 × 13 cm · 36.85 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

Also on IKEA:United States
  • Package #1

    206 × 30 × 13 cm

    Status:71.9 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Mercedes Benz A-Class 2019

Opening width / height

94 cm / 73 cm

Cargo width / height

99 cm / 84 cm

Cargo length seats up / down

82 cm / 151 cm

Loading sill height

65 cm

Mercedes Benz A-Class 2019

Measurements last checked and updated on Jul 29, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Mercedes Benz A-Class 2019.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Mercedes Benz A-Class 2019 boot

The A-Class gives you a hatchback boot with a modest mouth, 94 cm wide and 73 cm tall. The floor runs 82 cm with the seats up and nearly doubles to 151 cm folded, a 69 cm gain that is this boot's strongest card. It narrows to 99 cm at the back, so wide flat-packs sit better on the diagonal. The load lip is fairly high at 65 cm with an 11 cm drop to the floor, so lift heavy boxes in rather than drag them. Short and medium cartons go in seats up; long bed and wardrobe frames need the fold, and the very longest need a roof rack. Fold the seats before you load.

About the BILLY Bookcase, white, 80x28x202 cm package

The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.

On pickup day

A single 206 cm carton, and it does not fit the A-Class either way. The 94 cm opening width is the wall here: seats up you are 71.9 cm short, and folding the rear seats only pulls that back to 35 cm over. So the fold helps, but nowhere near enough to matter. One long flat box like this wants an estate or a van, not a hatchback boot. If you are set on the A-Class, lay the seats and carry it another day, or book delivery. Check the lip yourself with a tape before you commit.

Frequently asked questions

Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Mercedes Benz A-Class 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BILLY Bookcase, white, 80x28x202 cm fit in Mercedes Benz A-Class 2019?

No. With seats up, it is short by 71.9 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -71.9 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -71.9 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-71.9 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-71.9 cm). Seats down: No (-35 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -71.9 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -71.9 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.