Willfit in a?

No, it won't fit.

It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a Hyundai Tucson 2025 with seats up.

Hyundai Tucson 2025

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 61.7 cm even with diagonal loading. We're about 95% confident in this estimate.

BILLY Bookcase, white, 80x28x202 cm

BILLY Bookcase, white, 80x28x202 cm

Box: 206 × 30 × 13 cm · 36.85 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Mar 01, 2026

Also on IKEA:United States
  • Package #1

    206 × 30 × 13 cm

    Status:61.7 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Hyundai Tucson 2025

Opening width / height

102 cm / 73 cm

Cargo width / height

104 cm / 73 cm

Cargo length seats up / down

91 cm / 173 cm

Loading sill height

73 cm

Hyundai Tucson 2025

Measurements last checked and updated on Jun 25, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Hyundai Tucson 2025.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Hyundai Tucson 2025 boot

The Tucson's boot is a roomy, square space that transforms when you fold the rear seats. Seats up, the floor runs 91 cm deep behind a 102 cm wide by 73 cm tall opening. Fold the bench and the floor reaches 173 cm, a gain of 82 cm, which is this boot's best feature. The floor stays a generous 104 cm across at its narrowest, so wide flat boxes lie flat with room to spare. The load lip sits level with the floor, no drop to heave over. Long flat-pack panels need the seats down, so plan your load around that fold.

About the BILLY Bookcase, white, 80x28x202 cm package

The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.

On pickup day

No fit here. The BILLY box runs 206 cm long and the Tucson opening is 102 cm wide, so diagonally you are 61.7 cm short with the seats up. Folding the rear bench narrows that to 16.8 cm, better but still short, and the box will not pass at any angle. A single 206 cm carton needs more length than this boot gives you. Order delivery or split the trip. Tape-measure your own car before pickup, because the parcel shelf and side trims quietly take a few centimetres off these figures.

Frequently asked questions

Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BILLY Bookcase, white, 80x28x202 cm fit in Hyundai Tucson 2025?

No. With seats up, it is short by 61.7 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -61.7 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -61.7 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-61.7 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-61.7 cm). Seats down: No (-16.8 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -61.7 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -61.7 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.