Will fit in a ?

No, it won't fit.

It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a Cupra Formentor VZ 2023 with seats up.

Cupra Formentor VZ 2023

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 68 cm even with diagonal loading. We're about 95% confident in this estimate.

BILLY Bookcase, white, 80x28x202 cm

BILLY Bookcase, white, 80x28x202 cm

Box: 206 × 30 × 13 cm · 36.85 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

Also on IKEA:United States
  • Package #1

    206 × 30 × 13 cm

    Status:68 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height

99 cm / 70 cm

Cargo width / height

100 cm / 81 cm

Cargo length seats up / down

81 cm / 159 cm

Sill to floor drop

11 cm

Cupra Formentor VZ 2023

Measurements last checked and updated on Jul 26, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Cupra Formentor VZ 2023.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Cupra Formentor VZ 2023 boot

The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 99 cm wide × 70 cm tall, a floor 81 cm long with the seats up, and 100 cm across at its narrow point. Fold the rear bench and the floor stretches to 159 cm, a gain of 78 cm, so it nearly doubles in length once the seats drop. The tight point is that 99 cm opening. Wide or long loads go in on a diagonal, and tall boxes are capped by the 70 cm height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 11 cm lip.

About the BILLY Bookcase, white, 80x28x202 cm package

The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.

On pickup day

The BILLY bookcase is a no in the Cupra Formentor VZ either way you load it. At 206 cm the longest box overshoots the 99 cm boot opening by 68 cm seats up, so even turned diagonally it stays out. Folding the rear bench pulls the shortfall back to 25.6 cm, a 42.4 cm improvement, but the carton is still far too long for the aperture. Plan a van or home delivery for this one. Check the opening with a tape at the boot lip first, as your exact trim may differ by a centimetre or so.

Frequently asked questions

Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BILLY Bookcase, white, 80x28x202 cm fit in Cupra Formentor VZ 2023?

No. With seats up, it is short by 68 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -68 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -68 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-68 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-68 cm). Seats down: No (-25.6 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -68 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -68 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.