Will fit in a ?

No, it won't fit.

It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a BMW X3 2022 with seats up.

BMW X3 2022

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 52.8 cm even with diagonal loading. We're about 95% confident in this estimate.

BILLY Bookcase, white, 80x28x202 cm

BILLY Bookcase, white, 80x28x202 cm

Box: 206 × 30 × 13 cm · 36.85 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

Also on IKEA:United States
  • Package #1

    206 × 30 × 13 cm

    Status:52.8 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for BMW X3 2022

Opening width / height

112 cm / 79 cm

Cargo width / height

110 cm / 79 cm

Cargo length seats up / down

95 cm / 178 cm

Loading sill height

70 cm

BMW X3 2022

Measurements last checked and updated on Aug 30, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in BMW X3 2022.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the BMW X3 2022 boot

The X3's boot is a wide, flat loading bay. The opening measures 112 cm across by 79 cm tall, and the floor keeps 110 cm at its narrowest, so wide cartons that snag in smaller SUVs pass through here. Depth is the trade-off: 95 cm of floor with the seats up, 178 cm folded, a gain of +83 cm. The sill sits at 70 cm with no drop to the floor behind it, so a heavy box slides in level instead of being lowered over a lip. Long flat-packs need the bench down; seats up, this is a squarish bay for shorter boxes. Push heavy loads across the sill rather than lifting them over it.

About the BILLY Bookcase, white, 80x28x202 cm package

The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.

On pickup day

The BILLY ships as a single 206 cm carton and the X3 turns it away. Seats up you are 52.8 cm short at the opening, and even folded the gap is still 6.8 cm, both times set by the 112 cm opening width rather than floor length. The +46 cm you gain from folding gets you close, not through. One box also means no splitting the load: it all goes or nothing does. Book delivery or borrow a van instead of forcing it. And if a mate swears his X3 took one, ask about the year; these figures were measured on the 2022 shape.

Frequently asked questions

Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in BMW X3 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BILLY Bookcase, white, 80x28x202 cm fit in BMW X3 2022?

No. With seats up, it is short by 52.8 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -52.8 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -52.8 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-52.8 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-52.8 cm). Seats down: No (-6.8 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -52.8 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -52.8 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.