Will fit in a ?

No, it won't fit.

It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a BMW X1 2024 with seats up.

BMW X1 2024

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 56.7 cm even with diagonal loading. We're about 95% confident in this estimate.

BILLY Bookcase, white, 80x28x202 cm

BILLY Bookcase, white, 80x28x202 cm

Box: 206 × 30 × 13 cm · 36.85 kg

Based on IKEA UK (United Kingdom).

Package dimensions last checked and updated on Aug 06, 2026

Also on IKEA:United States
  • Package #1

    206 × 30 × 13 cm

    Status:56.7 cm short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for BMW X1 2024

Opening width / height

107 cm / 72 cm

Cargo width / height

101 cm / 75 cm

Cargo length seats up / down

90 cm / 164 cm

Loading sill height

71 cm

BMW X1 2024

Measurements last checked and updated on Jul 27, 2026

Helpful tips

Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in BMW X1 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the BMW X1 2024 boot

The X1 gives you a compact SUV boot with a fairly wide mouth, 107 cm across and 72 cm tall, but a short floor of 90 cm with the rear seats up. Fold them and it stretches to 164 cm, a gain of 74 cm, which is where this boot earns its keep. It takes medium boxes and multi-package loads well, though the longest flat-packs, the two-metre wardrobe frames and bed rails, will not clear whether the seats are up or folded. The floor narrows to 101 cm at the back, so load the widest item first. The lip sits 71 cm up with only a 3 cm drop to the floor, so expect a high lift then a flat slide.

About the BILLY Bookcase, white, 80x28x202 cm package

The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.

On pickup day

No, the BILLY bookcase does not fit the X1 in either seat setting. The carton is 206 cm long against a 107 cm wide opening, so diagonally you still fall 56.7 cm short with the seats up. Folding the back seats stretches the floor from 90 cm to 164 cm and cuts the gap to 14.7 cm, but the opening is the wall here, not the length. A 206 cm flat box wants an estate or a van. Lay it flat if you find a longer car, and protect the corners. Recheck against your own boot before you buy.

Frequently asked questions

Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in BMW X1 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will BILLY Bookcase, white, 80x28x202 cm fit in BMW X1 2024?

No. With seats up, it is short by 56.7 cm at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -56.7 cm margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -56.7 cm margin.

How tight is this fit?

This result is in the clear no-fit band (-56.7 cm at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-56.7 cm). Seats down: No (-14.7 cm). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -56.7 cm in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -56.7 cm around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.