HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+10.1 cm margin
Will fit in a ?
No, it won't fit.
It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for a BMW 1 Series 2020 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 75.2 cm even with diagonal loading. We're about 95% confident in this estimate.
BILLY Bookcase, white, 80x28x202 cm
Box: 206 × 30 × 13 cm · 36.85 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Also on IKEA:United States
Package
Status
Limiting factor
Best orientation
Package #1
206 × 30 × 13 cm
Status:75.2 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
95 cm / 66 cm
Cargo width / height
102 cm / 74 cm
Cargo length seats up / down
75 cm / 146 cm
Loading sill height
70 cm
BMW 1 Series 2020
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in BMW 1 Series 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in BMW 1 Series 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the BMW 1 Series 2020 boot
The 1 Series has a short hatch boot with a decent mouth. The opening is 95 cm wide by 66 cm tall, the floor gives you 75 cm with the rear seats up and 146 cm folded, and the width between the arches is 102 cm. Width is its strength, length is not: you have more room across the car than front to back. Weekly shopping, buggies and cases fit fine, anything near two metres does not. The sill sits 70 cm up with an 8 cm drop, so most loads slide in once the parcel shelf is out.
About the BILLY Bookcase, white, 80x28x202 cm package
The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.
On pickup day
BILLY does not fit the 1 Series. The carton runs 206 cm and you are 75.2 cm short with the rear seats up, held back by an opening 95 cm wide by 66 cm tall. Diagonal loading is already the best angle here and it still leaves the box outside. Drop the bench and you gain 37 cm, so the gap narrows to 38.2 cm and the carton still hangs well past the tailgate. Book the delivery. Hatch boots lose height under the parcel shelf, so pull it out before you trust any measurement.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in BMW 1 Series 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, white, 80x28x202 cm fit in BMW 1 Series 2020?
No. With seats up, it is short by 75.2 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -75.2 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -75.2 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-75.2 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-75.2 cm). Seats down: No (-38.2 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -75.2 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -75.2 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.