HAUGA Chest of 3 drawers with shelf, white, 70x46x116 cm
+21.5 cm margin
Will fit in an ?
No, it won't fit.
It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for an Audi Q3 2019 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 50.5 cm even with diagonal loading. We're about 95% confident in this estimate.
BILLY Bookcase, white, 80x28x202 cm
Box: 206 × 30 × 13 cm · 36.85 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Also on IKEA:United States
Package
Status
Limiting factor
Best orientation
Package #1
206 × 30 × 13 cm
Status:50.5 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
112 cm / 78 cm
Cargo width / height
100 cm / 87 cm
Cargo length seats up / down
90 cm / 166 cm
Loading sill height
75 cm
Audi Q3 2019
Measurements last checked and updated on Jul 31, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Audi Q3 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Audi Q3 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Audi Q3 2019 boot
The Audi Q3 gives you a wide, square boot mouth: 112 cm across and 78 cm tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 90 cm, and folding the rear bench stretches that to 166 cm, a gain of 76 cm that turns a school-run boot into a proper load bay. The floor stays 100 cm wide at its narrowest, so wide boxes sit flat. The catch is the lip: at 75 cm the sill is a high lift, with a 9 cm drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.
About the BILLY Bookcase, white, 80x28x202 cm package
The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.
On pickup day
The BILLY bookcase does not fit the Audi Q3, seats up or down. Its flat carton runs 206 cm × 30 cm × 13 cm, and the 112 cm wide opening is the wall you hit: on the diagonal you are 50.5 cm short. Folding the back seats improves things by 42.3 cm, yet the box still overshoots by 8.2 cm, so it stays a no. If you are set on carrying it, look at a car with a longer load floor or plan a home delivery. Check the parcel shelf is out before you even try the angle.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, white, 80x28x202 cm fit in Audi Q3 2019?
No. With seats up, it is short by 50.5 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -50.5 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -50.5 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-50.5 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-50.5 cm). Seats down: No (-8.2 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -50.5 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -50.5 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.