NORDEN Gateleg table, birch, 26/89/152x80 cm
+8 cm margin
Will fit in an ?
No, it won't fit.
It will not fit in this setup: BILLY Bookcase, white, 80x28x202 cm is too large for an Alfa Romeo Brera 2008 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 52.8 cm even with diagonal loading. We're about 95% confident in this estimate.
BILLY Bookcase, white, 80x28x202 cm
Box: 206 × 30 × 13 cm · 36.85 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Aug 06, 2026
Also on IKEA:United States
Package
Status
Limiting factor
Best orientation
Package #1
206 × 30 × 13 cm
Status:52.8 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
99 cm / 61 cm
Cargo width / height
84 cm / 89 cm
Cargo length seats up / down
95 cm / 152 cm
Loading sill height
90 cm
Alfa Romeo Brera 2008
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 80x28x202 cm in Alfa Romeo Brera 2008.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Brera 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Brera 2008 boot
The Brera gives you a letterbox: the opening is 99 cm wide but only 61 cm tall. Behind the seats you get 95 cm of floor, and folding the rear seats takes that to 152 cm, a gain of 57 cm. The floor narrows to 84 cm at its tightest, so a wide flat box has to go in at an angle. This boot handles long low loads better than tall ones. Plan for the sill: it sits 90 cm off the ground with a 28 cm drop to the floor, so lift high, rest the box on the sill, then let it down.
About the BILLY Bookcase, white, 80x28x202 cm package
The BILLY bookcase ships flat in one long pack: 206 cm long, 30 cm wide, 13 cm thick, 36.9 kg. The narrow profile is friendly, the 2 m length is not. Most hatchbacks and small SUVs cannot take it seats up: you need the rear bench folded and a clean diagonal line through the cabin. Estates, large SUVs, and crossovers like the Tesla Model Y handle it without effort. Slide it in flat with the long edge along the floor and protect the printed face: a single scratch ruins the front board.
On pickup day
No on the Brera. The BILLY box is 206 cm long and you are 52.8 cm short with the rear seats up, stopped by a boot opening 99 cm wide by 61 cm tall. The tailgate is reasonably wide but shallow, so a diagonal load runs out of room quickly. Folding the rear seats adds 33 cm and still leaves 19.8 cm of carton outside the car. Arrange delivery instead. If you measure it yourself, work from the tailgate seal rather than the outer bodywork.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, white, 80x28x202 cm in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, white, 80x28x202 cm fit in Alfa Romeo Brera 2008?
No. With seats up, it is short by 52.8 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -52.8 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -52.8 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-52.8 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-52.8 cm). Seats down: No (-19.8 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -52.8 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -52.8 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.