HAUGA Chest of 3 drawers, white, 70x46x84 cm
+13.2 cm margin
WillBILLY Bookcase, oak effect, 40x28x202 cmfit in aAudi A3 Sportback 2024?
No, it won't fit.
It will not fit in this setup: BILLY Bookcase, oak effect, 40x28x202 cm is too large for an Audi A3 Sportback 2024 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 68 cm even with diagonal loading. We're about 95% confident in this estimate.
BILLY Bookcase, oak effect, 40x28x202 cm
Box: 207 × 39 × 7 cm · 26.15 kg
Based on IKEA UK (United Kingdom).
Package dimensions last checked and updated on Mar 25, 2026
Package
Status
Limiting factor
Best orientation
Package #1
207 × 39 × 7 cm
Status:68 cm short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
97 cm / 77 cm
Cargo width / height
99 cm / 93 cm
Cargo length seats up / down
77 cm / 149 cm
Loading sill height
67 cm
Audi A3 Sportback 2024
Measurements last checked and updated on Jul 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, oak effect, 40x28x202 cm in Audi A3 Sportback 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Audi A3 Sportback 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Audi A3 Sportback 2024 boot
The Audi A3 Sportback boot is wide and square, better for bulk than for length. The opening is 97 cm wide by 77 cm tall, and the narrow part of the floor still holds 99 cm across, generous for this class. Seats up you get 77 cm of floor length, folding the rear bench takes that to 149 cm, a gain of 72 cm. The load lip is a low 67 cm with only a 16 cm drop to the floor, so lifting boxes in is easy on your back. It swallows wide boxes, crates and a couple of cases side by side, but long flat-packs still need the seats folded. Load your widest item flat first, then build up.
About the BILLY Bookcase, oak effect, 40x28x202 cm package
The BILLY bookcase ships in one flat pack at 207 by 39 by 7 cm, weighing 26.1 kg. The 207 cm length is the constraint, the package is rigid and does not bend. An estate or an SUV with seats folded swallows it; a small hatchback often falls short on either opening width or floor length. Slide it in straight along the boot floor with the rear seats fully down. Protect the corners, scuffed flat-pack edges show on the finished bookcase. Two people make loading easier.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, oak effect, 40x28x202 cm in Audi A3 Sportback 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, oak effect, 40x28x202 cm fit in Audi A3 Sportback 2024?
No. With seats up, it is short by 68 cm at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -68 cm margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -68 cm margin.
How tight is this fit?
This result is in the clear no-fit band (-68 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-68 cm). Seats down: No (-30.5 cm). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -68 cm in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -68 cm around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.