KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+10⅜″ margin
Will fit in a ?
No, it won't fit.
It will not fit in this setup: VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " is too large for a Peugeot 3008 2025 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 20″ even with diagonal loading. We're about 95% confident in this estimate.
VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 "
Box: 79¼″ × 15¼″ × 3½″ · 60 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 29, 2026
Package
Status
Limiting factor
Best orientation
Package #1
79¼″ × 15¼″ × 3½″
Status:20″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
40⅛″ / 30¾″
Cargo width / height
39¾″ / 35″
Cargo length seats up / down
39″ / 65¾″
Loading sill height
31½″
Peugeot 3008 2025
Measurements last checked and updated on Jul 19, 2026
Helpful tips
Use these loading tips to improve your chances of fitting VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Peugeot 3008 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Peugeot 3008 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 3008 2025 boot
The 3008 gives you a wide, square cargo area. The liftgate opening measures 40⅛″ wide × 30¾″ tall and the floor stays 39¾″ across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 39″ of floor, which suits boxed appliances and shorter flat packs. Fold the bench and you gain 26¾″, taking the floor to 65¾″, the biggest single change you can make here. The load lip sits 31½″ off the ground with a 4⅜″ drop to the floor, so lift high, then slide down and forward.
About the VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " package
VITTSJÖ ships as one long, flat carton, 79¼″ × 15¼″ × 3½″ and 60 lb 12 oz. The length is the awkward part: a rigid flat-pack just under 80 inches that will not bend around a tight boot mouth, and there is glass inside, so the box does not forgive a hard knock. A car that takes it easily is an estate, an SUV, or a hatchback with the rear seats folded flat. In anything smaller, load it diagonally from a folded seat back toward the boot, longest edge leading, and rest it on a blanket. Keep it printed side up so the glass shelves stay flat, and slide it in rather than drop it.
Frequently asked questions
Find quick answers about fit for VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " fit in Peugeot 3008 2025?
No. With seats up, it is short by 20″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -20″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -20″ margin.
How tight is this fit?
This result is in the clear no-fit band (-20″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-20″). Seats down: No (-4⅞″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -20″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -20″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.