
KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+5¼″ margin
No, it won't fit.

Fit Details

VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 "
Box: 79¼″ × 15¼″ × 3½″ · 60 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 29, 2026
Package
Status
Limiting factor
Best orientation
Package #1
79¼″ × 15¼″ × 3½″
Status:25⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
37″ / 28¾″
Cargo width / height
39″ / 33⅛″
Cargo length seats up / down
32¼″ / 59½″
Loading sill height
25⅝″
Mercedes Benz A-Class 2019
Measurements last checked and updated on Jul 29, 2026
Helpful tips
Use these loading tips to improve your chances of fitting VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Mercedes Benz A-Class 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Mercedes Benz A-Class 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Mercedes Benz A-Class 2019 boot
The A-Class gives you a hatchback boot with a modest mouth, 37″ wide and 28¾″ tall. The floor runs 32¼″ with the seats up and nearly doubles to 59½″ folded, a 27⅛″ gain that is this boot's strongest card. It narrows to 39″ at the back, so wide flat-packs sit better on the diagonal. The load lip is fairly high at 25⅝″ with a 4⅜″ drop to the floor, so lift heavy boxes in rather than drag them. Short and medium cartons go in seats up; long bed and wardrobe frames need the fold, and the very longest need a roof rack. Fold the seats before you load.
About the VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " package
VITTSJÖ ships as one long, flat carton, 79¼″ × 15¼″ × 3½″ and 60 lb 12 oz. The length is the awkward part: a rigid flat-pack just under 80 inches that will not bend around a tight boot mouth, and there is glass inside, so the box does not forgive a hard knock. A car that takes it easily is an estate, an SUV, or a hatchback with the rear seats folded flat. In anything smaller, load it diagonally from a folded seat back toward the boot, longest edge leading, and rest it on a blanket. Keep it printed side up so the glass shelves stay flat, and slide it in rather than drop it.
Frequently asked questions
Find quick answers about fit for VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Mercedes Benz A-Class 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " fit in Mercedes Benz A-Class 2019?
No. With seats up, it is short by 25⅞″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -25⅞″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -25⅞″ margin.
How tight is this fit?
This result is in the clear no-fit band (-25⅞″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-25⅞″). Seats down: No (-11⅜″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -25⅞″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -25⅞″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.