KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+6¾″ margin
Will fit in a ?
No, it won't fit.
It will not fit in this setup: VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " is too large for a Ford Focus 2023 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 24¾″ even with diagonal loading. We're about 95% confident in this estimate.
VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 "
Box: 79¼″ × 15¼″ × 3½″ · 60 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 29, 2026
Package
Status
Limiting factor
Best orientation
Package #1
79¼″ × 15¼″ × 3½″
Status:24¾″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
39⅜″ / 31½″
Cargo width / height
39¾″ / 38⅝″
Cargo length seats up / down
30⅜″ / 61″
Loading sill height
27⅛″
Ford Focus 2023
Measurements last checked and updated on Jul 13, 2026
Helpful tips
Use these loading tips to improve your chances of fitting VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Ford Focus 2023.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Ford Focus 2023
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Ford Focus 2023 boot
The Ford Focus boot is a compact hatchback space that rewards folding. Seats up, you get about 30⅜″ of floor length, fine for shopping runs, cases and small boxes. Fold the rear bench and it stretches to 61″, a gain of 30¾″, which is where flat-pack boxes start to fit. The mouth is 39⅜″ wide by 31½″ tall, and the floor narrows to 39¾″, so long slim packages ride better than tall bulky ones. The sill sits 27⅛″ high with a 7⅛″ drop to the floor, so lift over the lip, then slide the load down and forward.
About the VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " package
VITTSJÖ ships as one long, flat carton, 79¼″ × 15¼″ × 3½″ and 60 lb 12 oz. The length is the awkward part: a rigid flat-pack just under 80 inches that will not bend around a tight boot mouth, and there is glass inside, so the box does not forgive a hard knock. A car that takes it easily is an estate, an SUV, or a hatchback with the rear seats folded flat. In anything smaller, load it diagonally from a folded seat back toward the boot, longest edge leading, and rest it on a blanket. Keep it printed side up so the glass shelves stay flat, and slide it in rather than drop it.
Frequently asked questions
Find quick answers about fit for VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Ford Focus 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " fit in Ford Focus 2023?
No. With seats up, it is short by 24¾″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -24¾″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -24¾″ margin.
How tight is this fit?
This result is in the clear no-fit band (-24¾″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-24¾″). Seats down: No (-8½″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -24¾″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -24¾″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.