
KALLAX Shelf unit, white, 16 3/8x57 5/8 "
+7¼″ margin
Maybe, it's a tight fit.

Fit Details

VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 "
Box: 79¼″ × 15¼″ × 3½″ · 60 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 29, 2026
Package
Status
Limiting factor
Best orientation
Package #1
79¼″ × 15¼″ × 3½″
Status:-⅞″ tight
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
44⅛″ / 30¾″
Cargo width / height
39⅜″ / 34¼″
Cargo length seats up / down
35⅜″ / 65⅜″
Loading sill height
29½″
Audi Q3 2019
Measurements last checked and updated on Jul 31, 2026
Helpful tips
Use these loading tips to improve your chances of fitting VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Audi Q3 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Audi Q3 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Audi Q3 2019 boot
The Audi Q3 gives you a wide, square boot mouth: 44⅛″ across and 30¾″ tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 35⅜″, and folding the rear bench stretches that to 65⅜″, a gain of 29⅞″ that turns a school-run boot into a proper load bay. The floor holds 39⅜″ across at its narrowest, so wide boxes sit flat. The catch is the lip: at 29½″ the sill is a high lift, with a 3½″ drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.
About the VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " package
VITTSJÖ ships as one long, flat carton, 79¼″ × 15¼″ × 3½″ and 60 lb 12 oz. The length is the awkward part: a rigid flat-pack just under 80 inches that will not bend around a tight boot mouth, and there is glass inside, so the box does not forgive a hard knock. A car that takes it easily is an estate, an SUV, or a hatchback with the rear seats folded flat. In anything smaller, load it diagonally from a folded seat back toward the boot, longest edge leading, and rest it on a blanket. Keep it printed side up so the glass shelves stay flat, and slide it in rather than drop it.
Frequently asked questions
Find quick answers about fit for VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " fit in Audi Q3 2019?
Maybe. With seats down, this is a borderline fit at Opening width (-⅞″). Best orientation: diagonal.
What is the tightest part?
The limiting factor is Opening width, with -⅞″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -⅞″ margin.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats down.
Does it fit with seats up or seats down?
Seats up: No (-17½″). Seats down: Maybe (-⅞″). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -⅞″ around the limiting point.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (-⅞″ at Opening width).