KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+4⅛″ margin
Will fit in an ?
No, it won't fit.
It will not fit in this setup: VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " is too large for an Alfa Romeo Giulia 2019 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 16⅞″ even with diagonal loading. We're about 95% confident in this estimate.
VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 "
Box: 79¼″ × 15¼″ × 3½″ · 60 lb 12 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jul 29, 2026
Package
Status
Limiting factor
Best orientation
Package #1
79¼″ × 15¼″ × 3½″
Status:16⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
37⅜″ / 18½″
Cargo width / height
26⅜″ / 23¼″
Cargo length seats up / down
37″ / 68⅛″
Loading sill height
27⅛″
Alfa Romeo Giulia 2019
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Alfa Romeo Giulia 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Giulia 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Giulia 2019 boot
The Giulia has a long floor and a letterbox to get to it. The opening is 37⅜″ wide but only 18½″ tall, and that height rules out more loads than anything else about this boot. Behind it you get 37″ of floor with the seats up and 68⅛″ folded, a gain of 31⅛″, though the floor narrows to 26⅜″ at its tightest. Flat, low packages do well. Anything tall or square does not. The sill is 27⅛″ with a 4¾″ drop, so slide long boxes in flat and keep them low from the start.
About the VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " package
VITTSJÖ ships as one long, flat carton, 79¼″ × 15¼″ × 3½″ and 60 lb 12 oz. The length is the awkward part: a rigid flat-pack just under 80 inches that will not bend around a tight boot mouth, and there is glass inside, so the box does not forgive a hard knock. A car that takes it easily is an estate, an SUV, or a hatchback with the rear seats folded flat. In anything smaller, load it diagonally from a folded seat back toward the boot, longest edge leading, and rest it on a blanket. Keep it printed side up so the glass shelves stay flat, and slide it in rather than drop it.
Frequently asked questions
Find quick answers about fit for VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " in Alfa Romeo Giulia 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will VITTSJÖ Shelf unit, black-brown/glass, 39 3/8x68 7/8 " fit in Alfa Romeo Giulia 2019?
No. With seats up, it is short by 16⅞″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -16⅞″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -16⅞″ margin.
How tight is this fit?
This result is in the clear no-fit band (-16⅞″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-16⅞″). Seats down: No (-7⅞″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -16⅞″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -16⅞″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.