
FRIDHULT Sleeper sofa, Knisa light gray
+3⅞″ margin
All items that fit a Peugeot 208 2020
Yes, it will fit!

Fit Details

STRANDMON Wing chair, Nordvalla dark gray
Box: 42½″ × 30½″ × 20″ · 66 lb 8 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
42½″ × 30½″ × 20″
Status:+2½″ to spare
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits

Opening width / height above sill
33⅞″ / 22½″
Cargo width / height
37¾″ / 29½″
Cargo length seats up / down
26⅜″ / 51⅝″
Loading sill height
28″
Peugeot 208 2020
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting STRANDMON Wing chair, Nordvalla dark gray in Peugeot 208 2020.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Other items to check in Peugeot 208 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Peugeot 208 2020 boot
A box gets less height on the way into the 208's boot than it has once inside. The opening has 22½″ of clear height above the loading sill, while the boot is 29½″ tall from its floor, which sits 7⅛″ below the 28″ sill. The opening is 33⅞″ wide, and the floor is 37¾″ at its narrowest. With the rear seats up the floor is 26⅜″ long, and folding them adds 25¼″, for 51⅝″, which suits long flat packs. A tall box is the hardest fit. If you stack boxes, each one has to clear the 22½″ on its own, and together they must stay under 29½″.
About the STRANDMON Wing chair, Nordvalla dark gray package
At 42½″ × 30½″ × 20″, the STRANDMON wing chair box is a bulky block rather than a flat pack, and it weighs 66 lb 8 oz. That bulk works against you: you cannot get your arms around it or hold it close while you walk. Lying flat, it needs 20″ of height and a patch of boot floor 42½″ by 30½″, with the long side either along the boot or across it. Make it a two-person job: take one side each, hands under the bottom edges, and lift and lower it together, so it never drops onto a corner.
Frequently asked questions
Find quick answers about fit for STRANDMON Wing chair, Nordvalla dark gray in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will STRANDMON Wing chair, Nordvalla dark gray fit in Peugeot 208 2020?
Yes. With seats down, it fits with 2½″ to spare at Opening height. Best orientation: straight.
What is the tightest part?
The limiting factor is Opening height, with +2½″ margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Yes.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the tight positive clearance band (+2½″ at Opening height).
Does it fit with seats up or seats down?
Seats up: No (-8⅝″). Seats down: Yes (+2½″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with +2½″ margin.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.