FRANKLIN Bar stool with backrest, foldable, counter height black/black, 24 3/4 "
+2¼″ margin
Will fit in a ?
No, it won't fit.
None of the 3 packages of STORÅ Loft bed frame, black, Full/Double fit in a Hyundai Tucson 2025 with seats up.
Fit Details
With seats up, Not a fit. Even the best attempt still fails at opening width by 28⅞″ (worst package: Package #1 (89″ × 17¾″ × 3¼″)). We're about 95% confident in this estimate.
STORÅ Loft bed frame, black, Full/Double
Box: 89″ × 17¾″ × 3¼″ · 63 lb 15 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 05, 2026
Package
Status
Limiting factor
Best orientation
Package #1
89″ × 17¾″ × 3¼″
Status:28⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
89″ × 16¾″ × 3¼″
Status:28⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #3
89″ × 16¼″ × 3¼″
Status:28⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
40⅛″ / 28¾″
Cargo width / height
41″ / 28¾″
Cargo length seats up / down
35⅞″ / 68⅛″
Loading sill height
28¾″
Hyundai Tucson 2025
Measurements last checked and updated on Jun 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting STORÅ Loft bed frame, black, Full/Double in Hyundai Tucson 2025.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Hyundai Tucson 2025
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Hyundai Tucson 2025 boot
The Tucson's boot is a square, usable space that changes character when you fold the rear seats. With them up you get 35⅞″ of floor length behind a 40⅛″ wide by 28¾″ tall opening. Fold the bench and the floor stretches to 68⅛″, a gain of 32¼″, which is the boot's strongest trait. The floor stays a healthy 41″ across at its narrowest, so flat boxes sit well. The load lip is level with the floor, no drop to lift over. Long flat-pack panels only work once the seats are down, so plan around that fold.
About the STORÅ Loft bed frame, black, Full/Double package
The STORÅ loft bed ships as three long, flat boards, and the biggest one is 89″ × 17¾″ × 3¼″. None of the boxes is heavy on its own, but together they come to 183 lb, and every one is close to 89″ long. So the challenge here is length and weight, not bulk. You want an estate, a large SUV with the seats down, or a van, anything with a load floor comfortably past 89″. Load the boards flat and stacked along one side, longest run corner to corner, and lift each with a second person. Slide them in rather than drop them, so the thin edges do not dig into the boot floor.
Frequently asked questions
Find quick answers about fit for STORÅ Loft bed frame, black, Full/Double in Hyundai Tucson 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will STORÅ Loft bed frame, black, Full/Double fit in Hyundai Tucson 2025?
No. With seats up, it is short by 28⅞″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -28⅞″ margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -28⅞″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -28⅞″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-28⅞″). Seats down: No (-11″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (89″ × 17¾″ × 3¼″) is the tightest, with -28⅞″ at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -28⅞″ margin.
Do any packages fit?
No. All 3 packages fail this configuration, with the worst margin at Opening width.