KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+6½″ margin
Will fit in an ?
No, it won't fit.
None of the 3 packages of STORÅ Loft bed frame, black, Full/Double fit in an Alfa Romeo Brera 2008 with seats up.
Fit Details
With seats up, Not a fit. Even the best attempt still fails at opening width by 25⅜″ (worst package: Package #1 (89″ × 17¾″ × 3¼″)). We're about 95% confident in this estimate.
STORÅ Loft bed frame, black, Full/Double
Box: 89″ × 17¾″ × 3¼″ · 63 lb 15 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 05, 2026
Package
Status
Limiting factor
Best orientation
Package #1
89″ × 17¾″ × 3¼″
Status:25⅜″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #2
89″ × 16¾″ × 3¼″
Status:25⅜″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Package #3
89″ × 16¼″ × 3¼″
Status:25⅜″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
39″ / 24″
Cargo width / height
33⅛″ / 35″
Cargo length seats up / down
37⅜″ / 59⅞″
Loading sill height
35⅜″
Alfa Romeo Brera 2008
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting STORÅ Loft bed frame, black, Full/Double in Alfa Romeo Brera 2008.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Plan package order
Load each package one at a time. Individual package fit does not guarantee all packages will fit stacked together.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Brera 2008
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Brera 2008 boot
The Brera makes you lift. The sill sits 35⅜″ off the ground with an 11″ drop to the floor, so every heavy box goes up and over before it goes down. The opening is 39″ wide by 24″ tall, the floor runs 37⅜″ with the seats up and 59⅞″ folded, and folding adds only 22½″. Width narrows to 33⅛″ at its tightest. Soft bags and medium cartons work well in here. Long flat-pack boxes do not. Bring a second pair of hands for anything heavy, because the lip does the work otherwise.
About the STORÅ Loft bed frame, black, Full/Double package
The STORÅ loft bed ships as three long, flat boards, and the biggest one is 89″ × 17¾″ × 3¼″. None of the boxes is heavy on its own, but together they come to 183 lb, and every one is close to 89″ long. So the challenge here is length and weight, not bulk. You want an estate, a large SUV with the seats down, or a van, anything with a load floor comfortably past 89″. Load the boards flat and stacked along one side, longest run corner to corner, and lift each with a second person. Slide them in rather than drop them, so the thin edges do not dig into the boot floor.
Frequently asked questions
Find quick answers about fit for STORÅ Loft bed frame, black, Full/Double in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will STORÅ Loft bed frame, black, Full/Double fit in Alfa Romeo Brera 2008?
No. With seats up, it is short by 25⅜″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -25⅜″ margin in seats up.
Why does it not fit?
The blocker is Opening width. The worst margin is -25⅜″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -25⅜″ around the limiting point.
Do all packages fit in the car at the same time?
We test each package individually. All packages fitting individually does not guarantee they will fit stacked together. You may need multiple trips.
Does it fit with seats up or seats down?
Seats up: No (-25⅜″). Seats down: No (-12⅛″). Default selection follows YES > MAYBE > NO.
Which package is the hardest to load?
Package #1 (89″ × 17¾″ × 3¼″) is the tightest, with -25⅜″ at Opening width.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -25⅜″ margin.
Do any packages fit?
No. All 3 packages fail this configuration, with the worst margin at Opening width.