Will fit in a ?

Maybe, it's a tight fit.

It might fit, but it's tight: STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 " is borderline diagonally in a Peugeot 3008 2025 with seats down.

Peugeot 3008 2025

Fit Details

With seats down, It's close. This package is a borderline fit at opening width (-⅛″), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 "

STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 "

Box: 73½″ × 24″ × 2¾″ · 46 lb 1 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 03, 2026

  • Package #1

    73½″ × 24″ × 2¾″

    Status:-⅛″ tight

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 3008 2025

Opening width / height

40⅛″ / 30¾″

Cargo width / height

39¾″ / 35″

Cargo length seats up / down

39″ / 65¾″

Loading sill height

31½″

Peugeot 3008 2025

Measurements last checked and updated on Jul 19, 2026

Helpful tips

Use these loading tips to improve your chances of fitting STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 " in Peugeot 3008 2025.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Peugeot 3008 2025 boot

The 3008 gives you a wide, square cargo area. The liftgate opening measures 40⅛″ wide × 30¾″ tall and the floor stays 39¾″ across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 39″ of floor, which suits boxed appliances and shorter flat packs. Fold the bench and you gain 26¾″, taking the floor to 65¾″, the biggest single change you can make here. The load lip sits 31½″ off the ground with a 4⅜″ drop to the floor, so lift high, then slide down and forward.

About the STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 " package

The STOCKHOLM coffee table ships as one long, flat box: 73½″ by 24″ by 2¾″, and it weighs 46 lb 1 oz. The awkward part is the length paired with the weight. At 73½″ it is longer than most boot floors with the seats up, and the walnut veneer top makes it dense and rigid, so it will not flex around a tight corner. An estate, a hatchback with the rear seats folded, or an SUV handles it best. Slide it in flat along the folded floor, protect the veneer edge with a blanket, and keep it low so nothing shifts on top.

Frequently asked questions

Find quick answers about fit for STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 " in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will STOCKHOLM Coffee table, walnut veneer, 70 7/8x23 1/4 " fit in Peugeot 3008 2025?

Maybe. With seats down, this is a borderline fit at Opening width (-⅛″). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with -⅛″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -⅛″ margin.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

Does it fit with seats up or seats down?

Seats up: No (-15⅜″). Seats down: Maybe (-⅛″). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -⅛″ around the limiting point.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the very tight borderline band (-⅛″ at Opening width).