
NISSEDAL Mirror, black, 25 5/8x59 "
-½″ margin
No, it won't fit.

Fit Details

SLATTUM Upholstered bed frame, Vissle dark gray, Queen
Box: 65½″ × 29″ × 4″ · 81 lb 13 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 14, 2026
Package
Status
Limiting factor
Best orientation
Package #1
65½″ × 29″ × 4″
Status:2⅝″ short
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits

Opening width / height
27½″ / 26⅜″
Cargo width / height
37¾″ / 28″
Cargo length seats up / down
30⅜″ / 62⅝″
Loading sill height
30⅜″
Toyota C-HR 2020
Measurements last checked and updated on Aug 07, 2026
Helpful tips
Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Toyota C-HR 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Keep a straight loading path
Keep the package straight and level while loading.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Toyota C-HR 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Toyota C-HR 2020 boot
The C-HR gives you a small, high boot with a notably tight mouth. The opening is 27½ inches wide by 26⅜ tall, among the smallest around, and the loading sill sits high at 30⅜ inches, so you lift cargo up and in rather than slide it. Seats up the floor is short at 30⅜ inches, but fold the rear bench and it nearly doubles to 62⅝, a gain of 32¼ inches, with a narrow point of 37¾ inches. It handles small and medium boxes well and fights anything wide or long, since the tight opening stops them before the floor does. Angle boxes through the mouth, and load the longest ones only after folding.
About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package
SLATTUM in Queen packs the whole upholstered frame into one long flat box: 65½″ × 29″ × 4″, weighing 81 lb 13 oz. The shape is the difficulty: over 65″ long, wide enough to argue with most trunk openings, and heavy enough that the thin box flexes when carried by the ends. It suits an SUV, a wagon, or any car with the rear seats folded flat. Feed it in low corner first on the diagonal and support the middle as you slide: the packaging gives up at the handholds long before the frame inside is at risk.
Frequently asked questions
Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Toyota C-HR 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Toyota C-HR 2020?
No. With seats up, it is short by 2⅝″ at Opening width, even with straight loading.
What is the tightest part?
The limiting factor is Opening width, with -2⅝″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: No (-2⅝″). Seats down: No (-2⅝″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -2⅝″ in seats up, so clearance is below the required buffer.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -2⅝″ margin.
How tight is this fit?
This result is in the near miss band (-2⅝″ at Opening width).