Will fit in a ?

Maybe, it's a tight fit.

It might fit, but it's tight: SLATTUM Upholstered bed frame, Vissle dark gray, Queen is borderline diagonally in a Peugeot 3008 2025 with seats down.

Peugeot 3008 2025

Fit Details

With seats down, It's close. This package is a borderline fit at opening height (+½″), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

Box: 65½″ × 29″ × 4″ · 81 lb 13 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 14, 2026

  • Package #1

    65½″ × 29″ × 4″

    Status:+½″ tight

    Limiting factor:Opening height

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 3008 2025

Opening width / height

40⅛″ / 30¾″

Cargo width / height

39¾″ / 35″

Cargo length seats up / down

39″ / 65¾″

Loading sill height

31½″

Peugeot 3008 2025

Measurements last checked and updated on Jul 19, 2026

Helpful tips

Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Peugeot 3008 2025.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Peugeot 3008 2025 boot

The 3008 gives you a wide, square cargo area. The liftgate opening measures 40⅛″ wide × 30¾″ tall and the floor stays 39¾″ across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 39″ of floor, which suits boxed appliances and shorter flat packs. Fold the bench and you gain 26¾″, taking the floor to 65¾″, the biggest single change you can make here. The load lip sits 31½″ off the ground with a 4⅜″ drop to the floor, so lift high, then slide down and forward.

About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package

SLATTUM in Queen packs the whole upholstered frame into one long flat box: 65½″ × 29″ × 4″, weighing 81 lb 13 oz. The shape is the difficulty: over 65″ long, wide enough to argue with most trunk openings, and heavy enough that the thin box flexes when carried by the ends. It suits an SUV, a wagon, or any car with the rear seats folded flat. Feed it in low corner first on the diagonal and support the middle as you slide: the packaging gives up at the handholds long before the frame inside is at risk.

Frequently asked questions

Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Peugeot 3008 2025?

Maybe. With seats down, this is a borderline fit at Opening height (+½″). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening height, with +½″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with +½″ margin.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

Does it fit with seats up or seats down?

Seats up: No (-10½″). Seats down: Maybe (+½″). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use diagonal loading and focus on opening height. Keep the highest edge low at the trunk opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +½″ around the limiting point.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the borderline band (+½″ at Opening height).