All items that fit a Peugeot 208 2020

Will fit in a ?

No, it won't fit.

It will not fit in this setup: SLATTUM Upholstered bed frame, Vissle dark gray, Queen is too large for a Peugeot 208 2020 with seats up.

Peugeot 208 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 18⅞″ even with diagonal loading. We're about 95% confident in this estimate.

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

Box: 65½″ × 29″ × 4″ · 81 lb 13 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    65½″ × 29″ × 4″

    Status:18⅞″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 208 2020

Opening width / height above sill

33⅞″ / 22½″

Cargo width / height

37¾″ / 29½″

Cargo length seats up / down

26⅜″ / 51⅝″

Loading sill height

28″

Peugeot 208 2020

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Peugeot 208 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 208 2020 boot

A box gets less height on the way into the 208's boot than it has once inside. The opening has 22½″ of clear height above the loading sill, while the boot is 29½″ tall from its floor, which sits 7⅛″ below the 28″ sill. The opening is 33⅞″ wide, and the floor is 37¾″ at its narrowest. With the rear seats up the floor is 26⅜″ long, and folding them adds 25¼″, for 51⅝″, which suits long flat packs. A tall box is the hardest fit. If you stack boxes, each one has to clear the 22½″ on its own, and together they must stay under 29½″.

About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package

The SLATTUM Queen bed frame comes in one flat box of 65½″ × 29″ × 4″, and it weighs 81 lb 13 oz. That is a lot of weight for a box only 4″ thick, and at 29″ wide it is too broad to tuck under one arm. Lying flat, it needs 65½″ of boot floor in one direction and 29″ in the other. Get a second person to help. Before you lift, open the boot and clear the way to it, so the two of you can carry the box there in one go and never stand waiting with 81 lb 13 oz in your hands.

Frequently asked questions

Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Peugeot 208 2020?

No. With seats up, it is short by 18⅞″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -18⅞″ margin in seats up.

Why does it not fit?

The blocker is Opening width: with seats up, the box is 18⅞″ bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -18⅞″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

Does it fit with seats up or seats down?

Seats up: No (-18⅞″). Seats down: No (-6⅝″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -18⅞″ margin.

How tight is this fit?

This result is in the clear no-fit band (-18⅞″ at Opening width).