Will fit in a ?

No, it won't fit.

It will not fit in this setup: SLATTUM Upholstered bed frame, Vissle dark gray, Queen is too large for a Fiat 500 Cinquecento 2020 with seats up.

Fiat 500 Cinquecento 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 27¾″ even with diagonal loading. We're about 95% confident in this estimate.

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

Box: 65½″ × 29″ × 4″ · 81 lb 13 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 14, 2026

  • Package #1

    65½″ × 29″ × 4″

    Status:27¾″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Fiat 500 Cinquecento 2020

Opening width / height

31⅛″ / 35⅜″

Cargo width / height

40⅛″ / 43¼″

Cargo length seats up / down

20⅞″ / 46⅛″

Loading sill height

27½″

Fiat 500 Cinquecento 2020

Measurements last checked and updated on Aug 11, 2026

Helpful tips

Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Fiat 500 Cinquecento 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Fiat 500 Cinquecento 2020 boot

The Fiat 500 Cinquecento 2020 carries a city-size trunk: the opening measures 31⅛″ wide × 35⅜″ tall, taller than it is wide, and the floor runs just 20⅞″ with the seats up. Fold the bench and it stretches to 46⅛″, a gain of 25¼″. Between the wheel arches you get 40⅛″, wider than the mouth itself, so every box must clear 31⅛″ first. The liftover sits 27½″ high with a 7⅞″ drop down to the floor. Groceries, duffels and one modest box ride fine; long flat-packs do not. Fold the seats before loading, and lower heavy boxes over the sill rather than dragging them.

About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package

SLATTUM in Queen packs the whole upholstered frame into one long flat box: 65½″ × 29″ × 4″, weighing 81 lb 13 oz. The shape is the difficulty: over 65″ long, wide enough to argue with most trunk openings, and heavy enough that the thin box flexes when carried by the ends. It suits an SUV, a wagon, or any car with the rear seats folded flat. Feed it in low corner first on the diagonal and support the middle as you slide: the packaging gives up at the handholds long before the frame inside is at risk.

Frequently asked questions

Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Fiat 500 Cinquecento 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Fiat 500 Cinquecento 2020?

No. With seats up, it is short by 27¾″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -27¾″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -27¾″ margin.

How tight is this fit?

This result is in the clear no-fit band (-27¾″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-27¾″). Seats down: No (-16⅛″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -27¾″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -27¾″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.