Will fit in an ?

Maybe, it's a tight fit.

It might fit, but it's tight: SLATTUM Upholstered bed frame, Vissle dark gray, Queen is borderline diagonally in an Audi Q3 2019 with seats down.

Audi Q3 2019

Fit Details

With seats down, It's close. This package is a borderline fit at opening height (+½″), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

Box: 65½″ × 29″ × 4″ · 81 lb 13 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Aug 14, 2026

  • Package #1

    65½″ × 29″ × 4″

    Status:+½″ tight

    Limiting factor:Opening height

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi Q3 2019

Opening width / height

44⅛″ / 30¾″

Cargo width / height

39⅜″ / 34¼″

Cargo length seats up / down

35⅜″ / 65⅜″

Loading sill height

29½″

Audi Q3 2019

Measurements last checked and updated on Jul 31, 2026

Helpful tips

Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Audi Q3 2019.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Audi Q3 2019 boot

The Audi Q3 gives you a wide, square boot mouth: 44⅛″ across and 30¾″ tall, so most flat-pack cartons clear the opening with the seats up. Behind them the floor runs 35⅜″, and folding the rear bench stretches that to 65⅜″, a gain of 29⅞″ that turns a school-run boot into a proper load bay. The floor holds 39⅜″ across at its narrowest, so wide boxes sit flat. The catch is the lip: at 29½″ the sill is a high lift, with a 3½″ drop to the floor. Slide heavy boxes in on their edge rather than lowering them straight down.

About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package

SLATTUM in Queen packs the whole upholstered frame into one long flat box: 65½″ × 29″ × 4″, weighing 81 lb 13 oz. The shape is the difficulty: over 65″ long, wide enough to argue with most trunk openings, and heavy enough that the thin box flexes when carried by the ends. It suits an SUV, a wagon, or any car with the rear seats folded flat. Feed it in low corner first on the diagonal and support the middle as you slide: the packaging gives up at the handholds long before the frame inside is at risk.

Frequently asked questions

Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Audi Q3 2019?

Maybe. With seats down, this is a borderline fit at Opening height (+½″). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening height, with +½″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with +½″ margin.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

Does it fit with seats up or seats down?

Seats up: No (-8⅛″). Seats down: Maybe (+½″). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use diagonal loading and focus on opening height. Keep the highest edge low at the trunk opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +½″ around the limiting point.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the borderline band (+½″ at Opening height).