
KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+2⅝″ margin
Maybe, it's a tight fit.

Fit Details

SLATTUM Upholstered bed frame, Vissle dark gray, Queen
Box: 65½″ × 29″ × 4″ · 81 lb 13 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 14, 2026
Package
Status
Limiting factor
Best orientation
Package #1
65½″ × 29″ × 4″
Status:-¼″ tight
Limited by
Limiting factor:Opening height
Best orientation:Straight
Vehicle limits

Opening width / height
35⅜″ / 29⅞″
Cargo width / height
40⅛″ / 38¼″
Cargo length seats up / down
29⅞″ / 57⅞″
Loading sill height
30⅜″
Alfa Romeo Giulietta 2017
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Alfa Romeo Giulietta 2017.
Manage opening height
Keep the highest edge low at the trunk opening.
Keep a straight loading path
Keep the package straight and level while loading.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Alfa Romeo Giulietta 2017
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Giulietta 2017 boot
The Giulietta gives you a short, wide load bay rather than a deep one. The opening measures 35⅜″ wide by 29⅞″ tall, and behind it the floor runs only 29⅞″ with the seats up while the narrowest point across is 40⅛″. Fold the rear bench and the floor stretches to 57⅞″, a gain of 28″, which is where this boot does its real work. It takes stacked boxes and soft bags well, long flat cartons badly. The sill sits at 30⅜″ with an 8¼″ drop, so slide loads in and lower them rather than dropping them.
About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package
SLATTUM in Queen packs the whole upholstered frame into one long flat box: 65½″ × 29″ × 4″, weighing 81 lb 13 oz. The shape is the difficulty: over 65″ long, wide enough to argue with most trunk openings, and heavy enough that the thin box flexes when carried by the ends. It suits an SUV, a wagon, or any car with the rear seats folded flat. Feed it in low corner first on the diagonal and support the middle as you slide: the packaging gives up at the handholds long before the frame inside is at risk.
Frequently asked questions
Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Alfa Romeo Giulietta 2017, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Alfa Romeo Giulietta 2017?
Maybe. With seats up, this is a borderline fit at Opening height (-¼″). Best orientation: straight.
What is the tightest part?
The limiting factor is Opening height, with -¼″ margin in seats up.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening height) with -¼″ margin.
Which loading orientation works best?
Straight is the best orientation for this result in seats up.
How confident is this result?
Confidence is 75 out of 100 based on available dimensions and margin tightness.
Does it fit with seats up or seats down?
Seats up: Maybe (-¼″). Seats down: Maybe (-¼″). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use straight loading and focus on opening height. Keep the highest edge low at the trunk opening. Keep the package straight and level while loading.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the very tight borderline band (-¼″ at Opening height).