All items that fit an Alfa Romeo Brera 2008

Will fit in an ?

No, it won't fit.

It will not fit in this setup: SLATTUM Upholstered bed frame, Vissle dark gray, Queen is too large for an Alfa Romeo Brera 2008 with seats up.

Alfa Romeo Brera 2008

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening height, and you're short by 16″ even with diagonal loading. We're about 95% confident in this estimate.

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

SLATTUM Upholstered bed frame, Vissle dark gray, Queen

Box: 65½″ × 29″ × 4″ · 81 lb 13 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    65½″ × 29″ × 4″

    Status:16″ short

    Limiting factor:Opening height

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Alfa Romeo Brera 2008

Opening width / height above sill

39″ / 13″

Cargo width / height

33⅛″ / 24″

Cargo length seats up / down

37⅜″ / 59⅞″

Loading sill height

35⅜″

Alfa Romeo Brera 2008

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Alfa Romeo Brera 2008.

  • Manage opening height

    Keep the highest edge low at the trunk opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Alfa Romeo Brera 2008 boot

The Brera's way in is low. Above the loading sill there is a gap of only 13″, and every box has to pass through it. The tailgate opening is 39″ wide and the floor narrows to 33⅛″. Inside, the floor-to-top height is 24″, but that floor sits 11″ below a high sill at 35⅜″. With the rear seats up, the floor runs 37⅜″, which suits a short flat pack or two. Fold them and the floor reaches 59⅞″, room for longer packs. Find each box's thinnest side before you buy: it has to be 13″ or less to get through.

About the SLATTUM Upholstered bed frame, Vissle dark gray, Queen package

The SLATTUM Queen bed frame comes in one flat box of 65½″ × 29″ × 4″, and it weighs 81 lb 13 oz. That is a lot of weight for a box only 4″ thick, and at 29″ wide it is too broad to tuck under one arm. Lying flat, it needs 65½″ of boot floor in one direction and 29″ in the other. Get a second person to help. Before you lift, open the boot and clear the way to it, so the two of you can carry the box there in one go and never stand waiting with 81 lb 13 oz in your hands.

Frequently asked questions

Find quick answers about fit for SLATTUM Upholstered bed frame, Vissle dark gray, Queen in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SLATTUM Upholstered bed frame, Vissle dark gray, Queen fit in Alfa Romeo Brera 2008?

No. With seats up, it is short by 16″ at Opening height, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening height, with -16″ margin in seats up.

Why does it not fit?

The blocker is Opening height: with seats up, the box is 16″ bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -16″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

Does it fit with seats up or seats down?

Seats up: No (-16″). Seats down: No (-5⅝″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with -16″ margin.

How tight is this fit?

This result is in the clear no-fit band (-16″ at Opening height).