All items that fit an Audi A1 2020

Will fit in an ?

Yes, it will fit!

Good news: SKOGSTA Bench with storage, acacia/black, 47 1/4″ should fit diagonally in an Audi A1 2020 with seats down.

Audi A1 2020

Fit Details

With seats down, Good news - this package should fit, with 5⅛″ to spare at opening height when loading diagonal. We're about 95% confident in this estimate.

SKOGSTA Bench with storage, acacia/black, 47 1/4″

SKOGSTA Bench with storage, acacia/black, 47 1/4″

Box: 48¼″ × 19¼″ × 4¼″ · 44 lb 5 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    48¼″ × 19¼″ × 4¼″

    Status:+5⅛″ to spare

    Limiting factor:Opening height

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi A1 2020

Opening width / height above sill

39″ / 24⅜″

Cargo width / height

39″ / 30¾″

Cargo length seats up / down

26⅜″ / 53⅛″

Loading sill height

28¾″

Audi A1 2020

Measurements last checked and updated on Oct 21, 2026

About the Audi A1 2020 boot

Width is the easy part of the A1's boot. The opening is 39″ across, and the floor never gets narrower than that. Length is tighter. Seats up, the floor is just 26⅜″ long, and folding them gives you another 26¾″, for 53⅛″, which takes shorter flat packs but not the longest. Height is limited too, with 24⅜″ of clear height above a loading sill 28¾″ off the ground and the floor 6¼″ lower still. With the seats up the floor is wider than it is long, so a box too long to go in front to back may still fit across it, or at an angle on its side.

About the SKOGSTA Bench with storage, acacia/black, 47 1/4″ package

Do not let the size of this box fool you. It is flat and fairly compact, 48¼″ × 19¼″ × 4¼″, so it looks easy to carry, but it weighs 44 lb 5 oz, and that weight gets tiring on a long walk to the car. Flat, its footprint on the boot floor is 48¼″ by 19¼″. When you lift it, alone or with help, put your hands underneath and spread them wide, rather than pinching the top edges of the cardboard, which can tear under that weight.

Frequently asked questions

Find quick answers about fit for SKOGSTA Bench with storage, acacia/black, 47 1/4″ in Audi A1 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SKOGSTA Bench with storage, acacia/black, 47 1/4″ fit in Audi A1 2020?

Yes. With seats down, it fits with 5⅛″ to spare at Opening height. Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening height, with +5⅛″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with +5⅛″ margin.

How tight is this fit?

This result is in the good clearance band (+5⅛″ at Opening height).

Does it fit with seats up or seats down?

Seats up: No (-3¾″). Seats down: Yes (+5⅛″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +5⅛″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.