All items that fit an Alfa Romeo Brera 2008

Will fit in an ?

Yes, it will fit!

Good news: SKOGSTA Bench with storage, acacia/black, 47 1/4″ should fit in a straight orientation in an Alfa Romeo Brera 2008 with seats down.

Alfa Romeo Brera 2008

Fit Details

With seats down, Good news - this package should fit, with 8¾″ to spare at opening height when loading straight. We're about 95% confident in this estimate.

SKOGSTA Bench with storage, acacia/black, 47 1/4″

SKOGSTA Bench with storage, acacia/black, 47 1/4″

Box: 48¼″ × 19¼″ × 4¼″ · 44 lb 5 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

  • Package #1

    48¼″ × 19¼″ × 4¼″

    Status:+8¾″ to spare

    Limiting factor:Opening height

    Best orientation:Straight

Vehicle limits

Trunk limits for Alfa Romeo Brera 2008

Opening width / height above sill

39″ / 13″

Cargo width / height

33⅛″ / 24″

Cargo length seats up / down

37⅜″ / 59⅞″

Loading sill height

35⅜″

Alfa Romeo Brera 2008

Measurements last checked and updated on Oct 21, 2026

About the Alfa Romeo Brera 2008 boot

The Brera's way in is low. Above the loading sill there is a gap of only 13″, and every box has to pass through it. The tailgate opening is 39″ wide and the floor narrows to 33⅛″. Inside, the floor-to-top height is 24″, but that floor sits 11″ below a high sill at 35⅜″. With the rear seats up, the floor runs 37⅜″, which suits a short flat pack or two. Fold them and the floor reaches 59⅞″, room for longer packs. Find each box's thinnest side before you buy: it has to be 13″ or less to get through.

About the SKOGSTA Bench with storage, acacia/black, 47 1/4″ package

Do not let the size of this box fool you. It is flat and fairly compact, 48¼″ × 19¼″ × 4¼″, so it looks easy to carry, but it weighs 44 lb 5 oz, and that weight gets tiring on a long walk to the car. Flat, its footprint on the boot floor is 48¼″ by 19¼″. When you lift it, alone or with help, put your hands underneath and spread them wide, rather than pinching the top edges of the cardboard, which can tear under that weight.

Frequently asked questions

Find quick answers about fit for SKOGSTA Bench with storage, acacia/black, 47 1/4″ in Alfa Romeo Brera 2008, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will SKOGSTA Bench with storage, acacia/black, 47 1/4″ fit in Alfa Romeo Brera 2008?

Yes. With seats down, it fits with 8¾″ to spare at Opening height. Best orientation: straight.

What is the tightest part?

The limiting factor is Opening height, with +8¾″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Yes.

Which loading orientation works best?

Straight is the best orientation for this result in seats down.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-6¼″). Seats down: Yes (+8¾″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening height) with +8¾″ margin.

How tight is this fit?

This result is in the comfortable clearance band (+8¾″ at Opening height).