KALLAX Shelf unit, white, 30 1/8x30 1/8 "
+3¼″ margin
Will fit in a ?
No, it won't fit.
It will not fit in this setup: PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " is too large for a Seat Leon 2019 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 27″ even with diagonal loading. We're about 95% confident in this estimate.
PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 "
Box: 95¼″ × 24″ × 2¾″ · 93 lb 14 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 23, 2026
Package
Status
Limiting factor
Best orientation
Package #1
95¼″ × 24″ × 2¾″
Status:27″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
42⅞″ / 31½″
Cargo width / height
31⅞″ / 41⅜″
Cargo length seats up / down
32⅝″ / 58⅝″
Loading sill height
29½″
Seat Leon 2019
Measurements last checked and updated on Aug 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Seat Leon 2019.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Seat Leon 2019
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Seat Leon 2019 boot
The Seat Leon 2019 gives you a hatchback boot that suits shorter, wider loads more than very long ones. The opening measures 42⅞″ wide by 31½″ tall, and the floor runs 32⅝″ with the seats up, stretching to 58⅝″ once you fold the rear bench, a gain of 26″. At its narrowest the floor is 31⅞″ across. The loading sill sits 29½″ off the ground with a 9⅞″ drop to the floor, so heavier boxes need a lift up and over. Boxes that clear the opening load easily; anything long wants the seats folded.
About the PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " package
The PAX frame is one long, flat, rigid box. It measures 95¼″ by 24″ by 2¾″, so the length is the single dimension that decides everything. There is only one package, and it weighs 93 lb 14 oz, so it is a firm two-person carry that will not bend to fit. A 95¼″ run means most cars need the rear seats folded flat, so an estate, a van or a large SUV is the natural home for it. Slide it in flat and push it against one side, since standing it on edge risks flexing the panel along its length.
Frequently asked questions
Find quick answers about fit for PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Seat Leon 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " fit in Seat Leon 2019?
No. With seats up, it is short by 27″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -27″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -27″ margin.
How tight is this fit?
This result is in the clear no-fit band (-27″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-27″). Seats down: No (-12½″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -27″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -27″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.