
POÄNG Armchair, birch veneer/Knisa light beige
+4⅞″ margin
No, it won't fit.

Fit Details

PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 "
Box: 95¼″ × 24″ × 2¾″ · 93 lb 14 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 23, 2026
Package
Status
Limiting factor
Best orientation
Package #1
95¼″ × 24″ × 2¾″
Status:39⅞″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height
37″ / 32¼″
Cargo width / height
40⅛″ / 40⅛″
Cargo length seats up / down
26⅜″ / 56¾″
Loading sill height
30¾″
Renault Captur 2024
Measurements last checked and updated on Jul 08, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Renault Captur 2024.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Renault Captur 2024
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Renault Captur 2024 boot
The Captur gives you a compact, upright boot rather than a long one. Behind the rear seats the floor runs about 26 3/8 inches, so tall or square boxes load fine but anything long sits at an angle. The opening is 37 inches wide and 32 1/4 inches tall, and there is a 7 7/8 inch drop from the sill down to the floor, so you lift over a lip then set down. Fold the rear bench and the floor stretches to 56 3/4 inches, a gain of 30 3/8 inches that changes what the car can take. Slide long boxes in low and straight down the 40 1/8 inch centre channel.
About the PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " package
The PAX frame is one long, flat, rigid box. It measures 95¼″ by 24″ by 2¾″, so the length is the single dimension that decides everything. There is only one package, and it weighs 93 lb 14 oz, so it is a firm two-person carry that will not bend to fit. A 95¼″ run means most cars need the rear seats folded flat, so an estate, a van or a large SUV is the natural home for it. Slide it in flat and push it against one side, since standing it on edge risks flexing the panel along its length.
Frequently asked questions
Find quick answers about fit for PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Renault Captur 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " fit in Renault Captur 2024?
No. With seats up, it is short by 39⅞″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -39⅞″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -39⅞″ margin.
How tight is this fit?
This result is in the clear no-fit band (-39⅞″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-39⅞″). Seats down: No (-24⅜″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -39⅞″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -39⅞″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.