Willfit in a?

No, it won't fit.

It will not fit in this setup: PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " is too large for a Peugeot 3008 2025 with seats up.

Peugeot 3008 2025

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 30⅞″ even with diagonal loading. We're about 95% confident in this estimate.

PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 "

PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 "

Box: 95¼″ × 24″ × 2¾″ · 93 lb 14 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jun 23, 2026

  • Package #1

    95¼″ × 24″ × 2¾″

    Status:30⅞″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 3008 2025

Opening width / height

40⅛″ / 30¾″

Cargo width / height

39¾″ / 35″

Cargo length seats up / down

39″ / 65¾″

Loading sill height

31½″

Peugeot 3008 2025

Measurements last checked and updated on Jul 19, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Peugeot 3008 2025.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 3008 2025 boot

The 3008 gives you a wide, square cargo area. The liftgate opening measures 40⅛″ wide × 30¾″ tall and the floor stays 39¾″ across at its narrowest, so you keep almost full width right to the back. With the rear seats up you get 39″ of floor, which suits boxed appliances and shorter flat packs. Fold the bench and you gain 26¾″, taking the floor to 65¾″, the biggest single change you can make here. The load lip sits 31½″ off the ground with a 4⅜″ drop to the floor, so lift high, then slide down and forward.

About the PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " package

The PAX frame is one long, flat, rigid box. It measures 95¼″ by 24″ by 2¾″, so the length is the single dimension that decides everything. There is only one package, and it weighs 93 lb 14 oz, so it is a firm two-person carry that will not bend to fit. A 95¼″ run means most cars need the rear seats folded flat, so an estate, a van or a large SUV is the natural home for it. Slide it in flat and push it against one side, since standing it on edge risks flexing the panel along its length.

Frequently asked questions

Find quick answers about fit for PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Peugeot 3008 2025, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " fit in Peugeot 3008 2025?

No. With seats up, it is short by 30⅞″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -30⅞″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -30⅞″ margin.

How tight is this fit?

This result is in the clear no-fit band (-30⅞″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-30⅞″). Seats down: No (-15⅞″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -30⅞″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -30⅞″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.