POÄNG Armchair, birch veneer/Knisa light beige
+2⅞″ margin
WillPAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 "fit in aFord Puma 2022?
No, it won't fit.
It will not fit in this setup: PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " is too large for a Ford Puma 2022 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 37¾″ even with diagonal loading. We're about 95% confident in this estimate.
PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 "
Box: 95¼″ × 24″ × 2¾″ · 93 lb 14 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Jun 23, 2026
Package
Status
Limiting factor
Best orientation
Package #1
95¼″ × 24″ × 2¾″
Status:37¾″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
38¼″ / 30⅜″
Cargo width / height
39⅜″ / 37⅜″
Cargo length seats up / down
28⅜″ / 57⅞″
Loading sill height
30¾″
Ford Puma 2022
Measurements last checked and updated on Mar 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Ford Puma 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Ford Puma 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Ford Puma 2022 boot
The Puma boot is short and wide rather than long. The opening is 38¼″ across and 30⅜″ tall, and the floor runs 39⅜″ at its narrow point, so boxes that are broad and flat sit well across it. Seats up you only get 28⅜″ of length, so tall or long cartons need the rear seats down, which opens the floor to 57⅞″, a gain of 29½″. The standout here is the sill, 30¾″ off the ground with a 7⅛″ drop to the floor. That is a high lip, so lift heavy boxes to the sill, rest them, then slide them in.
About the PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " package
The PAX frame is one long, flat, rigid box. It measures 95¼″ by 24″ by 2¾″, so the length is the single dimension that decides everything. There is only one package, and it weighs 93 lb 14 oz, so it is a firm two-person carry that will not bend to fit. A 95¼″ run means most cars need the rear seats folded flat, so an estate, a van or a large SUV is the natural home for it. Slide it in flat and push it against one side, since standing it on edge risks flexing the panel along its length.
Frequently asked questions
Find quick answers about fit for PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " in Ford Puma 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8 " fit in Ford Puma 2022?
No. With seats up, it is short by 37¾″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -37¾″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -37¾″ margin.
How tight is this fit?
This result is in the clear no-fit band (-37¾″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-37¾″). Seats down: No (-22½″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -37¾″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -37¾″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.