All items that fit an Audi Q3 2019

Will fit in an ?

No, it won't fit.

It will not fit in this setup: PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ is too large for an Audi Q3 2019 with seats up.

Audi Q3 2019

Fit Details

With seats up, This package will not fit in this setup. The blocker is cargo length, and you're short by 31⅞″ even with diagonal loading. We're about 95% confident in this estimate.

PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″

PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″

Box: 95¼″ × 24″ × 2¾″ · 93 lb 14 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Oct 21, 2026

Link to the source

  • Package #1

    95¼″ × 24″ × 2¾″

    Status:31⅞″ short

    Limiting factor:Cargo length

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Audi Q3 2019

Opening width / height above sill

44⅛″ / 27⅛″

Cargo width / height

39⅜″ / 30¾″

Cargo length seats up / down

35⅜″ / 65⅜″

Loading sill height

29½″

Audi Q3 2019

Measurements last checked and updated on Oct 21, 2026

Helpful tips

Use these loading tips to improve your chances of fitting PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ in Audi Q3 2019.

  • Use available cargo length

    Use seats down if available to gain cargo length.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

Alternatives that fit in Audi Q3 2019

Ranked by fit margin and package-dimension similarity. This improves as we index more items.

About the Audi Q3 2019 boot

Fold the rear seats in the Q3 and the floor grows by 30″, from 35⅜″ to 65⅜″. Even with the seats up, some boxes longer than 35⅜″ fit at an angle, standing on their side. The tailgate opens 44⅛″ wide, but the floor is only 39⅜″ at its narrowest, so a box lying across the boot has to fit within that 39⅜″. Every box also has to pass under 27⅛″ of clear height above the loading sill. The floor is 3½″ lower than the sill, and from there the boot is 30¾″ tall. Empty the boot before you go: with the seats up, every inch of that 35⅜″ counts.

About the PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ package

The wall-mounted frame ships as a single box of 95¼″ × 24″ × 2¾″, and it weighs 93 lb 14 oz. That is a lot of weight for a box this thin, and the length puts the two of you far apart, neither able to see what the other end is about to hit. Your boot needs 95¼″ of floor, and 24″ of width, for the box to lie flat. Agree who leads before you lift. The person walking forwards calls every turn and every stop, so the 93 lb 14 oz never shifts onto one of you without warning.

Frequently asked questions

Find quick answers about fit for PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ in Audi Q3 2019, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ fit in Audi Q3 2019?

No. With seats up, it is short by 31⅞″ at Cargo length, even with diagonal loading.

What is the tightest part?

The limiting factor is Cargo length, with -31⅞″ margin in seats up.

Why does it not fit?

The blocker is Cargo length: with seats up, the box is 31⅞″ bigger than the space there.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -31⅞″ around the limiting point.

How tight is this fit?

This result is in the clear no-fit band (-31⅞″ at Cargo length).

Does it fit with seats up or seats down?

Seats up: No (-31⅞″). Seats down: No (-15½″). Default selection follows YES > MAYBE > NO.

What do YES, MAYBE and NO mean here?

YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.