
KALLAX Shelf unit, white, 30 1/8x30 1/8″
+7″ margin
All items that fit an Audi A1 2020
No, it won't fit.

Fit Details

PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″
Box: 95¼″ × 24″ × 2¾″ · 93 lb 14 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Oct 21, 2026
Package
Status
Limiting factor
Best orientation
Package #1
95¼″ × 24″ × 2¾″
Status:36¼″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits

Opening width / height above sill
39″ / 24⅜″
Cargo width / height
39″ / 30¾″
Cargo length seats up / down
26⅜″ / 53⅛″
Loading sill height
28¾″
Audi A1 2020
Measurements last checked and updated on Oct 21, 2026
Helpful tips
Use these loading tips to improve your chances of fitting PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ in Audi A1 2020.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Audi A1 2020
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Audi A1 2020 boot
Width is the easy part of the A1's boot. The opening is 39″ across, and the floor never gets narrower than that. Length is tighter. Seats up, the floor is just 26⅜″ long, and folding them gives you another 26¾″, for 53⅛″, which takes shorter flat packs but not the longest. Height is limited too, with 24⅜″ of clear height above a loading sill 28¾″ off the ground and the floor 6¼″ lower still. With the seats up the floor is wider than it is long, so a box too long to go in front to back may still fit across it, or at an angle on its side.
About the PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ package
The wall-mounted frame ships as a single box of 95¼″ × 24″ × 2¾″, and it weighs 93 lb 14 oz. That is a lot of weight for a box this thin, and the length puts the two of you far apart, neither able to see what the other end is about to hit. Your boot needs 95¼″ of floor, and 24″ of width, for the box to lie flat. Agree who leads before you lift. The person walking forwards calls every turn and every stop, so the 93 lb 14 oz never shifts onto one of you without warning.
Frequently asked questions
Find quick answers about fit for PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ in Audi A1 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will PAX Wall-mounted storage frame, white, 39 3/8x22 7/8x92 7/8″ fit in Audi A1 2020?
No. With seats up, it is short by 36¼″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -36¼″ margin in seats up.
Why does it not fit?
The blocker is Opening width: with seats up, the box is 36¼″ bigger than the space there.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -36¼″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
Does it fit with seats up or seats down?
Seats up: No (-36¼″). Seats down: No (-22⅞″). Default selection follows YES > MAYBE > NO.
What do YES, MAYBE and NO mean here?
YES means there is at least 2⅜″ to spare at the tightest point, in the best way the box can go in. MAYBE means it fits on paper, but with less than 2⅜″ to spare, so trim, the parcel shelf or the loading angle can decide it. NO means the box is bigger than the space at its tightest point, whichever way it goes in. Every margin on this page is that real gap: the car's measurement minus the box's.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -36¼″ margin.
How tight is this fit?
This result is in the clear no-fit band (-36¼″ at Opening width).