Willfit in a?

Maybe, it's a tight fit.

It might fit, but it's tight: NISSEDAL Mirror, black, 25 5/8x59 " is borderline diagonally in a Renault Captur 2024 with seats down.

Renault Captur 2024

Fit Details

With seats down, It's close. This package is a borderline fit at opening width (+⅜″), best loaded diagonal. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

NISSEDAL Mirror, black, 25 5/8x59 "

NISSEDAL Mirror, black, 25 5/8x59 "

Box: 60¾″ × 25¾″ × 2¼″ · 21 lb 7 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 06, 2026

  • Package #1

    60¾″ × 25¾″ × 2¼″

    Status:+⅜″ tight

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Renault Captur 2024

Opening width / height

37″ / 32¼″

Cargo width / height

40⅛″ / 40⅛″

Cargo length seats up / down

26⅜″ / 56¾″

Loading sill height

30¾″

Renault Captur 2024

Measurements last checked and updated on Jul 08, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NISSEDAL Mirror, black, 25 5/8x59 " in Renault Captur 2024.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Renault Captur 2024 boot

The Captur gives you a compact, upright boot rather than a long one. Behind the rear seats the floor runs about 26 3/8 inches, so tall or square boxes load fine but anything long sits at an angle. The opening is 37 inches wide and 32 1/4 inches tall, and there is a 7 7/8 inch drop from the sill down to the floor, so you lift over a lip then set down. Fold the rear bench and the floor stretches to 56 3/4 inches, a gain of 30 3/8 inches that changes what the car can take. Slide long boxes in low and straight down the 40 1/8 inch centre channel.

About the NISSEDAL Mirror, black, 25 5/8x59 " package

The NISSEDAL mirror comes as one large, thin panel: 60¾″ by 25¾″ and only 2¼″ thick, at 21 lb 7 oz. It is not heavy, but it is over five feet long and it is glass, so it is the fragility and the span that make it awkward, not the mass. A flat panel this long wants to flex and it does not forgive a knock on the corner. An estate or a hatchback with the seats folded holds it flat, which is what you want. Slide it in on its back, flat on the floor, with a blanket underneath and nothing stacked on top. Keep the corners away from hard trim, that is where mirrors crack first.

Frequently asked questions

Find quick answers about fit for NISSEDAL Mirror, black, 25 5/8x59 " in Renault Captur 2024, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NISSEDAL Mirror, black, 25 5/8x59 " fit in Renault Captur 2024?

Maybe. With seats down, this is a borderline fit at Opening width (+⅜″). Best orientation: diagonal.

What is the tightest part?

The limiting factor is Opening width, with +⅜″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with +⅜″ margin.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats down.

Does it fit with seats up or seats down?

Seats up: No (-14⅞″). Seats down: Maybe (+⅜″). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use diagonal loading and focus on opening width. Keep the narrow edge leading while entering the opening. Load diagonally first, then straighten once inside.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with +⅜″ around the limiting point.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the borderline band (+⅜″ at Opening width).