Willfit in a?

No, it won't fit.

It will not fit in this setup: NISSEDAL Mirror, black, 25 5/8x59 " is too large for a Peugeot 208 2020 with seats up.

Peugeot 208 2020

Fit Details

With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 17¼″ even with diagonal loading. We're about 95% confident in this estimate.

NISSEDAL Mirror, black, 25 5/8x59 "

NISSEDAL Mirror, black, 25 5/8x59 "

Box: 60¾″ × 25¾″ × 2¼″ · 21 lb 7 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 06, 2026

  • Package #1

    60¾″ × 25¾″ × 2¼″

    Status:17¼″ short

    Limiting factor:Opening width

    Best orientation:Diagonal

Vehicle limits

Trunk limits for Peugeot 208 2020

Opening width / height

33⅞″ / 29½″

Cargo width / height

37¾″ / 36⅝″

Cargo length seats up / down

26⅜″ / 51⅝″

Loading sill height

28″

Peugeot 208 2020

Measurements last checked and updated on Jun 23, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NISSEDAL Mirror, black, 25 5/8x59 " in Peugeot 208 2020.

  • Optimize opening width

    Keep the narrow edge leading while entering the opening.

  • Load diagonally first

    Load diagonally first, then straighten once inside.

  • Try fitting alternatives

    Check the Similar items that fit section for safer alternatives.

About the Peugeot 208 2020 boot

The Peugeot 208 2020 gives you a compact boot with a fairly narrow mouth. The opening is 33⅞″ wide by 29½″ tall, and the floor behind it runs 26⅜″ with the seats up. Drop the rear bench and the floor opens to 51⅝″, a gain of 25¼″, which nearly doubles your length. Across the floor the narrow point is 37¾″. It swallows weekly shopping and soft bags easily, but a wide rigid box can catch on that 33⅞″ opening. The sill stands 28″ high with a gentle 7⅛″ drop inside, so rest the load on the lip and push it in.

About the NISSEDAL Mirror, black, 25 5/8x59 " package

The NISSEDAL mirror comes as one large, thin panel: 60¾″ by 25¾″ and only 2¼″ thick, at 21 lb 7 oz. It is not heavy, but it is over five feet long and it is glass, so it is the fragility and the span that make it awkward, not the mass. A flat panel this long wants to flex and it does not forgive a knock on the corner. An estate or a hatchback with the seats folded holds it flat, which is what you want. Slide it in on its back, flat on the floor, with a blanket underneath and nothing stacked on top. Keep the corners away from hard trim, that is where mirrors crack first.

Frequently asked questions

Find quick answers about fit for NISSEDAL Mirror, black, 25 5/8x59 " in Peugeot 208 2020, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NISSEDAL Mirror, black, 25 5/8x59 " fit in Peugeot 208 2020?

No. With seats up, it is short by 17¼″ at Opening width, even with diagonal loading.

What is the tightest part?

The limiting factor is Opening width, with -17¼″ margin in seats up.

What should I do instead?

Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.

Is the trunk opening the issue?

Yes. The tightest constraint is at the opening (Opening width) with -17¼″ margin.

How tight is this fit?

This result is in the clear no-fit band (-17¼″ at Opening width).

Does it fit with seats up or seats down?

Seats up: No (-17¼″). Seats down: No (-4⅜″). Default selection follows YES > MAYBE > NO.

Why does it not fit?

The blocker is Opening width. The worst margin is -17¼″ in seats up, so clearance is below the required buffer.

Can I load it diagonally?

Yes, diagonal is the best orientation for this check, with -17¼″ around the limiting point.

Which loading orientation works best?

Diagonal is the best orientation for this result in seats up.

How confident is this result?

Confidence is 95 out of 100 based on available dimensions and margin tightness.