Will fit in a ?

Maybe, it's a tight fit.

It might fit, but it's tight: NISSEDAL Mirror, black, 25 5/8x59 " is borderline in a straight orientation in a Cupra Formentor VZ 2023 with seats down.

Cupra Formentor VZ 2023

Fit Details

With seats down, It's close. This package is a borderline fit at cargo length (+⅝″), best loaded straight. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.

NISSEDAL Mirror, black, 25 5/8x59 "

NISSEDAL Mirror, black, 25 5/8x59 "

Box: 60¾″ × 25¾″ × 2¼″ · 21 lb 7 oz

Based on IKEA US (United States).

Package dimensions last checked and updated on Jul 06, 2026

  • Package #1

    60¾″ × 25¾″ × 2¼″

    Status:+⅝″ tight

    Limiting factor:Cargo length

    Best orientation:Straight

Vehicle limits

Trunk limits for Cupra Formentor VZ 2023

Opening width / height

39″ / 27½″

Cargo width / height

39⅜″ / 31⅞″

Cargo length seats up / down

31⅞″ / 62⅝″

Sill to floor drop

4⅜″

Cupra Formentor VZ 2023

Measurements last checked and updated on Jul 26, 2026

Helpful tips

Use these loading tips to improve your chances of fitting NISSEDAL Mirror, black, 25 5/8x59 " in Cupra Formentor VZ 2023.

  • Use available cargo length

    Push the package fully toward the seat backs to use all cargo length.

  • Keep a straight loading path

    Keep the package straight and level while loading.

  • Clear real-world obstacles

    Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.

About the Cupra Formentor VZ 2023 boot

The Cupra Formentor VZ gives you a compact performance SUV boot: an opening 39″ wide × 27½″ tall, a floor 31⅞″ long with the seats up, and 39⅜″ across at its narrow point. Fold the rear bench and the floor grows to 62⅝″, a gain of 30¾″, so the car nearly doubles its length once the seats drop. The tight point is that 39″ opening. Wide or long loads have to go in on a diagonal, and tall boxes are capped by the 27½″ height. It takes medium cartons and folded flat-packs well, but not full-length wardrobe frames. Fold the seats first, feed long boxes corner in, and mind the 4⅜″ lip.

About the NISSEDAL Mirror, black, 25 5/8x59 " package

The NISSEDAL mirror comes as one large, thin panel: 60¾″ by 25¾″ and only 2¼″ thick, at 21 lb 7 oz. It is not heavy, but it is over five feet long and it is glass, so it is the fragility and the span that make it awkward, not the mass. A flat panel this long wants to flex and it does not forgive a knock on the corner. An estate or a hatchback with the seats folded holds it flat, which is what you want. Slide it in on its back, flat on the floor, with a blanket underneath and nothing stacked on top. Keep the corners away from hard trim, that is where mirrors crack first.

Frequently asked questions

Find quick answers about fit for NISSEDAL Mirror, black, 25 5/8x59 " in Cupra Formentor VZ 2023, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.

Will NISSEDAL Mirror, black, 25 5/8x59 " fit in Cupra Formentor VZ 2023?

Maybe. With seats down, this is a borderline fit at Cargo length (+⅝″). Best orientation: straight.

What is the tightest part?

The limiting factor is Cargo length, with +⅝″ margin in seats down.

Do I need to fold the seats?

Results differ by configuration. Seats up is No and seats down is Maybe.

Which loading orientation works best?

Straight is the best orientation for this result in seats down.

How confident is this result?

Confidence is 75 out of 100 based on available dimensions and margin tightness.

Does it fit with seats up or seats down?

Seats up: No (-10¼″). Seats down: Maybe (+⅝″). Default selection follows YES > MAYBE > NO.

What can I try to make it work?

Use straight loading and focus on cargo length. Push the package fully toward the seat backs to use all cargo length. Keep the package straight and level while loading.

What could change the result in real life?

Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.

How tight is this fit?

This result is in the borderline band (+⅝″ at Cargo length).